Abstract:Based on the previous work (Yun et al., Chem. Eng. Sci. 59 (2004) 449–457), after the analysis of adsorbent structure, bed expansion and in-bed fluid hydrodynamics, a model was developed to describe the axial variations of the mean particle size and local bed voidage for adsorbents with a broad size distribution and different densities in expanded bed. In the model, the different-size particles were assumed to have different densities while the equal-size particles have the same density. Particle densities were described by a function that considered two parts of each particle: the resin-core part consisting of resin and inert core-particulates, and the thin resin film part without inert core-particulates. With UpFront FastLine SP adsorbents as interest test particles, the particle size and local voidage changes with bed height were measured in a 20mm I.D. column and then predicted by the model. It was shown that the mean particle size decreased, while the local bed voidage increased with increase of bed height. These trends are similar to those for particles with a broad normal size distribution and nearly uniform density. More obvious increase trends of voidage with increase of bed height exist in expanded beds with UpFront FastLine SP particles compared with those of Streamline particles. The present model gave a good prediction of bed expansion, the mean particle sizes and local voidages in most parts of bed compared with experimental data.

Pressure loss in packed beds of multicomponent mixtures of flat particles with particle overlap, including random chips

Experimental study on pressure drop of packed beds with binary sintered ore particle mixtures

Measurement and modeling of axial distribution of adsorbent particles in expanded bed: taking into account the particle density difference

Wall Effects on the Pressure Drop in Packed Beds of Irregularly Shaped Sintered Ore Particles

Wall Effect on Pressure Drop in Packed Beds

Gas flow through a packed bed with low tube-to-particle diameter ratio: Effect of pellet roughness

Random Adhesive Loose Packings of Micron-Sized Particles under a Uniform Flow Field

Effects of Hydrodynamic Interaction on Random Adhesive Loose Packings of Micron-Sized Particles

A novel model of pressure drop for airflow penetrating randomly packed cylindrical particles

Packing of Cylindrical Particles: DEM Simulations and Experimental Measurements

Modeling of the Minimum Fluidization Velocity and the Incipient Fluidization Pressure Drop in a Conical Fluidized Bed with Negative Pressure

Investigation on the Friction Mechanism and Its Relation to the Force Chains During Powder Compaction

The importance of a velocity-dependent friction coefficient in representing the flow behaviour of a blade-driven powder bed

Effects of coefficient of friction and coefficient of restitution on static packing characteristics of polydisperse spherical pebble bed

DEM simulation of random loose packings of micron-sized particles with both adhesion and friction

Particle-resolved simulations and measurements of the flow through a uniform packed bed

Liquid–liquid mass transfer and pressure drop behavior in micro‐packed beds with different shaped packings

Computer simulation of random loose packings of micro-particles in presence of adhesion and friction

The Impact of Discrete Element Method Parameters on Realistic Representation of Spherical Particles in a Packed Bed

Numerical Study of Mixing Pebble Flow with Different Density in Circulating Packed Bed

Influence of rolling friction on single spout fluidized bed simulation