Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Tunable fiber laser using fiber Bragg gratings integrated carbon fiber composite with large tuning range

Tunable and Programmable Fiber Ring Laser Based on Digital-Controlled Chirped Fiber Bragg Grating

C-band continuously tunable lasers using tunable fiber Bragg gratings

On Tunable Range of Giant Magnetostrictive Based Fiber Bragg Grating Tuning

Tunable Erbium-Doped Fiber Laser Assisted By A Fs-Laser Introduced Random Fiber Grating

Experimental demonstration of a widely tunable two-section DFB laser

Tunable CW Bi-Doped Fiber Laser System From 1320 to 1370 nm Using a Fiber Bragg Grating

Microcavity-coupled fiber Bragg grating with tunable reflection spectra and speed of light

Tunable L-band Mode-Locked Bi-EDF Fiber Laser Based on Chirped Fiber Bragg Grating

Pump efficiency improvement of a C-band tunable fiber laser using optical circulator and tunable fiber gratings

Tunable Single-Frequency Ytterbium-Doped Fiber BDR Laser

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

A Novel High-Sensitivity Chirp Tuning Device of Fiber Grating

Robust femtosecond-written chirped and tilted fiber Bragg gratings for Raman filtering in multi-kW fiber lasers

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

A Broad Continuous Temperature Tunable DBR Single-Frequency Fiber Laser at 1064 nm

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

Tunable Ytterbium-Doped Fiber Laser Based on a Mechanically Induced Long Period Holey Fiber Grating

Highly efficient dual-wavelength ytterbium-doped fiber linear cavity laser based on cascaded fiber Bragg gratings

Tilted Fiber Bragg Grating Inscription in Boron Co-Doped Photosensitive Optical Fiber Using 266 nm Solid State Laser Pulses