Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Tunable L-band Mode-Locked Bi-EDF Fiber Laser Based on Chirped Fiber Bragg Grating

Tunable and Programmable Fiber Ring Laser Based on Digital-Controlled Chirped Fiber Bragg Grating

C- and L-Bands Wavelength-Tunable Mode-Locked Fiber Laser

Wavelength-Tunable Mode-Locked Erbium Fiber Laser Based on Phase-Shifted Long-Period Gratings

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Chirped and Phase-Sampled Fiber Bragg Grating for Tunable DBR Fiber Laser.

Spectrally tunable femtosecond erbium fiber laser based on large-normal-dispersion cavity

A 100 Mw-Level Single-Mode Switchable Dual-Wavelength Erbium-Doped Fiber Laser

Tunable fiber laser using fiber Bragg gratings integrated carbon fiber composite with large tuning range

Tunable Single-Frequency Ytterbium-Doped Fiber BDR Laser

Large Anomalous-Dispersion Mode-Locked Fiber Laser Based on a Chirped Fiber Bragg Grating Pair

Tunable CW Bi-Doped Fiber Laser System From 1320 to 1370 nm Using a Fiber Bragg Grating

100nm Widely Tunable Er-doped Fiber Laser

Tunable Erbium-Doped Fiber Laser Based on Random Distributed Feedback

Wavelength Tunable, Linearly Polarized Mode-Locked Fiber Laser Using Chirped Fiber Bragg Grating

Wavelength Tunable and Switchable EDF Ring Laser using Cascaded-Chirped Long Period Fiber Grating

Switchable Transverse-Mode Operation of an Actively Mode-Locked EDF Laser Based on Low-Modal-crosstalk Mode MUX/DEMUX

Tunable Erbium-Doped Fiber Laser Assisted By A Fs-Laser Introduced Random Fiber Grating

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

Mode-locked fiber laser based on a small-period long-period fiber grating inscribed by femtosecond laser