Abstract:Bismuth telluride-based alloys are the best performing thermoelectric materials near room temperature. Grain size refinement and nanostructuring are the core stratagems for improving thermoelectric and mechanical properties. However, the donor-like effect induced by grain size refinement strongly restricts the thermoelectric properties especially in the vicinity of room temperature. In this study, the formation mechanism for the donor-like effect in Bi2Te3-based compounds was revealed by synthesizing five batches of polycrystalline samples. We demonstrate that the donor-like effect in Bi2Te3-based compounds is strongly related to the vacancy defects (VBi‴ and VTe···) induced by the fracturing process and oxygen in air for the first time. The oxygen-induced donor-like effect dramatically increases the carrier concentration from 2.5 × 1019 cm-3 for the zone melting ingot and bulks sintered with powders ground under an inert atmosphere to 7.5 × 1019 cm-3, which is largely beyond the optimum carrier concentration and seriously deteriorates the thermoelectric performance. Moreover, it is found that both avoiding exposure to air and eliminating the thermal vacancy defects (VBi‴ and VTe···) via heat treatment before exposure to air can effectively remove the donor-like effect, producing almost the same carrier concentration and Seebeck coefficient as those of the zone melting ingot for these samples. Therefore, a defect equation of oxygen-induced donor-like effect was proposed and was further explicitly corroborated by positron annihilation measurement. With the removal of donor-like effect and improved texturing via multiple hot deformation (HD) processes, a maximum power factor of 3.5 mW m-1 K-2 and a reproducible maximum ZT value of 1.01 near room temperature are achieved. This newly proposed defect equation of the oxygen-induced donor-like effect will provide a guideline for developing higher-performance V2VI3 polycrystalline materials for near-room-temperature applications.

Precursor-Led Grain Boundary Engineering for Superior Thermoelectric Performance in Niobium Strontium Titanate

High thermoelectric performance of niobium-doped strontium titanate bulk material affected by all-scale grain boundary and inclusions

Record High Thermoelectric Performance in Bulk SrTiO3 Via Nano-Scale Modulation Doping

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

First-principles Calculations and High Thermoelectric Performance of La–Nb Doped SrTiO3ceramics

Key to Enhance Thermoelectric Performance by Controlling Crystal Size of Strontium Titanate

Enhancing the thermoelectric properties of Nb-doped TiO 2 -based ceramics through in-situ synthesis of β-Sn inclusions at grain boundaries

Enhancement of thermoelectric properties in Sr0.7Ba0.3Nb2O6−δ-based ceramics via nano-sized Ti as additive

Enhanced thermoelectric performance in n-type SrTiO3/SiGe composite.

Preparation of novel titanium-niobium-oxygen composite ceramic with excellent thermoelectric properties using the high-pressure and high-temperature method

Thermoelectric Properties of Nb-doped (nd0.55li0.36)tio3bulk Ceramics with Superlattice Structure

High thermoelectric properties of P-SiGe/Sr0.9La0.1Ti0.9-xZrxNb0.1O3 composite

Ni doping and rational annealing boost thermoelectric performance of nanostructured double perovskite Pr1.8Sr0.2CoFeO6

Effect of graphene oxide and carbon black on the thermoelectric performance of niobium doped strontium titanate

Enhancement of Thermoelectric Performance of Sr0.9‐xNd0.1Ti0.9Nb0.1O3 Ceramics by Introducing Sr Vacancies

Nb-doped Grain Boundary Induced Thermoelectric Power Factor Enhancement in La-doped SrTiO3 Nanoceramics

Controlling Precipitation and Dopant Effects To Achieve Promising Thermoelectric Performance in CaTiO 3

Dramatic Enhancement of Thermoelectric Performance in PbTe by Unconventional Grain Shrinking in Sintering Process

Modulation of Charge Transport at Grain Boundaries in SrTiO3: Toward a High Thermoelectric Power Factor at Room Temperature

Removing the Oxygen-Induced Donor-like Effect for High Thermoelectric Performance in n-Type Bi 2 Te 3 -Based Compounds

Realizing high thermoelectric performance in Te nanocomposite through Sb2Te3 incorporation