Abstract:La-doped strontium titanite (Sr0.9La0.1TiO3) is a promising candidate for n-type oxide thermoelectric materials. However, the ZT values of this material are low, leading to low conversion efficiency. Improvements in this efficiency are required. In this work, a high ZT value of 0.50 was obtained for Sr0.9La0.1TiO3 ceramic samples by adding 10 wt % Bi2O3 sintering aids and 20 wt % nanosized Ti powders to the matrix material. Although Ti was oxidized to TiO2 during the sintering process, nanoscale phase interfaces were beneficial for phonon scattering and thermal conductivity reduction. Nanosized metallic Bi and Bi2O3 particles were observed. These two factors played an important role in reducing the thermal conductivity from 2.5 W/(m K) at room temperature to 1.31 W/(m K) at 1073 K. Nanostructure control using nanosized metal powders as additives combined with the Bi2O3 sintering aid paves a way for enhancement of thermoelectric properties of oxide thermoelectric materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c13693?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c13693</a>.XRD patterns of the presintered powders; XRD patterns, SEM images, and XPS spectra of SLT ceramic samples sintered in the Ar atmosphere; BSE images, EDS analyses, and TEM images for Sr0.9La0.1TiO3/20 wt % Ti ceramic samples sintered in the Ar atmosphere; temperature dependence of thermal diffusivity and specific heat capacity for SLT ceramic samples annealed in the Ar + C atmosphere (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c13693/suppl_file/am0c13693_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Nb-doped Grain Boundary Induced Thermoelectric Power Factor Enhancement in La-doped SrTiO3 Nanoceramics

High thermoelectric performance of niobium-doped strontium titanate bulk material affected by all-scale grain boundary and inclusions

First-principles Calculations and High Thermoelectric Performance of La–Nb Doped SrTiO3ceramics

Record High Thermoelectric Performance in Bulk SrTiO3 Via Nano-Scale Modulation Doping

Enhancement of thermoelectric properties of SrTiO3/LaNb–SrTiO3 composite by different doping levels*

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

Effect of crystal size distribution on thermoelectric performance for Lanthanum-doped strontium titanate bulk material

High thermoelectric properties of P-SiGe/Sr0.9La0.1Ti0.9-xZrxNb0.1O3 composite

Relationship Between the Thermoelectric Properties and Infrared Emissivity of Nb-Doped TiO2

Modulation of Charge Transport at Grain Boundaries in SrTiO3: Toward a High Thermoelectric Power Factor at Room Temperature

Enhanced thermoelectric performance in n-type SrTiO3/SiGe composite.

Thermoelectric Properties of Nb-doped (nd0.55li0.36)tio3bulk Ceramics with Superlattice Structure

Enhancement of thermoelectric properties in Sr0.7Ba0.3Nb2O6−δ-based ceramics via nano-sized Ti as additive

Key to Enhance Thermoelectric Performance by Controlling Crystal Size of Strontium Titanate

Effect of La3+, Ag+ and Bi3+ doping on thermoelectric properties of SrTiO3: First-principles investigation

Enhancing the thermoelectric properties of Nb-doped TiO 2 -based ceramics through in-situ synthesis of β-Sn inclusions at grain boundaries

Effect of Crystal Orientation on Seebeck Coefficient and Electrical Conductivity of SrTiO 3 Single Crystals

Precursor-Led Grain Boundary Engineering for Superior Thermoelectric Performance in Niobium Strontium Titanate

Enhancement of Thermoelectric Performance of Sr 0.9 La 0.1 TiO 3 -Based Ceramics Regulated by Nanostructures

Controlling Precipitation and Dopant Effects To Achieve Promising Thermoelectric Performance in CaTiO 3

Thermoelectric Properties of Electron Doped SrO(SrTiO3)n (n=1,2) Ceramics