Abstract:Radio Frequency (RF) driven negative ion source is the preferred ion source for negative ion based Neutral Beam Injection system (NNBI). The plasma generator, which consists of RF driver(s) and an expansion chamber, is one of the key parts for NNBI. The distribution of cusp magnetic field which is generated by permanent magnets installed at the lateral wall of the expansion chamber is a common issue, due to the great influence on electron density, electron temperature and spatial uniformity of plasma density in the extraction area. Two kinds of configuration of cusp magnetic field (checkerboard type and symmetric type) and three types of arrangement of permanent magnets (with three, four and five rows of magnets) have been carried out with the approach of finite element and the experimental performance. On the RF negative ion source testbed, a moveable Langmuir probe has been adopted to investigate the characteristic of electron density and temperature near the extraction area. Since the symmetric type with three rows of permanent magnets generates the distribution of cusp magnetic field that contribute to extract the plasma from RF driver and improve the probability of particle collision easily, the higher electron density and the lower electron temperature was obtained via simulation. The experimental conclusion is that the symmetric type with three rows of permanent magnets leads to a higher electron density and lower electron temperature, showing a great agreement with simulation results. The results are helpful to optimize the structure and performance of high power ion source, and provide support for the development of large area RF negative ion sources with multi-driver.

The engineering design of half-size RF negative ion source for CRAFT-NNBI

Structure design and analysis of RF ion source for negative ion source test facility

Conceptual design of 5 MW-NBI injector for HL-2 M tokamak

Research and development progress of radio frequency ion source for neutral beam injector at ASIPP

Influence of cusp magnetic field configuration on plasma parameters of radio frequency driven negative ion source for CRAFT NNBI

Final design and manufacturing of the neutralizer for the negative ion-based neutral beam injector test facility of CRAFT

Development of Rf Driver Used in Negative Ion Source at Hust

Study on stray electrons ejecting from a long-pulse negative ion source for fusion

Physics and engineering design of 400 keV H- accelerator for negative ion based neutral beam injection system in China

Optimization design of magnetic filter for the prototype RF negative ion source at ASIPP

Design of infrared radiation diagnostic calorimeter for the prototype radio frequency driven negative ion source for neutral beam injection

Suppression of stray electrons in the negative ion accelerator of CRAFT NNBI test facility

Engineering design and manufacturing of a radio frequency plasma driver without Faraday shield for NBI application

Design optimization of slit aperture Faraday shield for RF ion source in CRAFT NNBI system

Plasma discharge experiments of a Faraday shieldless driver for high-power and long-pulse radio frequency ion source for NBI application

RF Simulation and Improvements of an Ion Source Test Facility at HUST

Preliminary result of cavity ring-down spectroscopy system for radio frequency negative ion source test facility

Simulations for the cesium dynamics of the RF-driven prototype ion source for CRAFT N-NBI

Development and preliminary results of radio frequency ion source

First Prototype of a Cesium Oven Design for Negative-Ion-Source-Based Neutral Beam Injector at ASIPP

Design of a compact RFQ linac for the transportable neutron source