Abstract:The bond properties at layer interfaces are a required input in mechanistic asphalt pavement models. For design and analysis procedures, involving the calculation of key responses that are commonly linked to performance, perfect bond conditions are regularly assumed between layers. One emerging approach for prolonging the service life of asphalt pavements, either new or rehabilitated, is installing asphalt grid reinforcement (AGR) products between paving lifts. In these cases, the perfect bond assumption may not hold – undermining the reinforcement potential. Accordingly, the objective of this study was to investigate the effects of layer interface properties on key responses in pavements with AGR. The investigation was carried out by combining results from a full-scale construction, laboratory tests on asphalt concrete (AC) cores, and synthetic simulations. The latter were performed with a recently developed semi-analytic mechanistic code that can accept AGR products. This code can handle time- and temperature-dependent layer and interface properties, as well as moving loads. From the laboratory tests, it was found that the bond between AC lifts, with and without an AGR, is time- and temperature-dependent – best characterised by a relaxation interface stiffness function. This relaxation function was measured to be consistently larger without an AGR than with an AGR. Nonetheless, pavement simulations showed that including an AGR has no pronounced effect on strain magnitudes under high-speed/low-temperature conditions, can lessen horizontal strain magnitudes at the reinforced interface and at the AC bottom (mainly under slow-speed/high-temperature conditions, and depending on the installation depth of the AGR), and has no pronounced effect on deflections regardless of the loading speed and temperature level. It is concluded that even if laboratory measurements display a reduced interface stiffness when including an AGR, the reduction may not have any practical implication on key pavement responses, and the reinforcement potential is not necessarily undermined. The modelling and experimental approaches outlined and utilised in this study offer a rational tool for analysing this matter/question on a case-by-case basis.

Experimental and numerical modelling of shear bonding between asphalt layers

Numerically Supported Experimental Determination of the Behavior of the Interlayer Bond in Asphalt Pavement

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

Multiscale Modelling of Bitumen-Aggregate Interfaces from Molecular Debonding to Pull-off Strength

Numerical and Experimental Analysis for the Interlayer Behavior of Double-Layered Asphalt Pavement Specimens

Predictive model for the interface bond strength of geosynthetic-reinforced asphalt layers

Viscoelasticity finite element analysis of interface bonding behaviors of asphalt pavement

Test and Evaluation Method of lnterlaminar Shear Performance of Composite Pavement

Mechanistic investigation of grid-reinforced asphalt pavements with measured interface properties

Effects of Asphalt Mixture Type on Asphalt Pavement Interlayer Shear Properties

Mechanical Characterisation of Interface Shear Strain of Multi-Layer Composite Pavement

Influence of bonding condition of different interfaces on the mechanical responses and failure mode of asphalt pavement

Characterization of the Bonding Fracture Properties of the Asphalt-Aggregate System Using a Thin-Film Interface Test

Investigation of the Microstructural Fracture Behaviour of Asphalt Mixtures Using the Finite Element Method

Rheological and Interaction Analysis of Asphalt Binder, Mastic and Mortar

Analytical Calculations for Asphalt Pavement Considering Interlayer Performance

Investigating the interaction between asphalt binder and fresh and simulated RAP aggregate

A state-of-the-art review on interfacial behavior between asphalt binder and mineral aggregate

Study on Interfacial Debonding Between Bitumen and Aggregate Based on Micromechanical Damage Model

Using molecular dynamics to investigate interfacial adhesion between asphalt binder and mineral aggregate

A Robust Statistical Analysis of Factors Affecting Interface Bonding between Asphalt Pavement Layers