Abstract:This article reports on the locomotion performance of a miniature robot that features 3D-printed rigid legs driven by linear traveling waves (TWs). The robot structure was a millimeter-sized rectangular glass plate with two piezoelectric patches attached, which allowed for traveling wave generation at a frequency between the resonant frequencies of two contiguous flexural modes. As a first goal, the location and size of the piezoelectric patches were calculated to maximize the structural displacement while preserving a standing wave ratio close to 1 (cancellation of wave reflections from the boundaries). The design guidelines were supported by an analytical 1D model of the structure and could be related to the second derivative of the modal shapes without the need to rely on more complex numerical simulations. Additionally, legs were bonded to the glass plate to facilitate the locomotion of the structure; these were fabricated using 3D stereolithography printing, with a range of lengths from 0.5 mm to 1.5 mm. The optimal location of the legs was deduced from the profile of the traveling wave envelope. As a result of integrating both the optimal patch length and the legs, the speed of the robot reached as high as 100 mm/s, equivalent to 5 body lengths per second (BL/s), at a voltage of 65 Vpp and a frequency of 168 kHz. The blocking force was also measured and results showed the expected increase with the mass loading. Furthermore, the robot could carry a load that was 40 times its weight, opening the potential for an autonomous version with power and circuits on board for communication, control, sensing, or other applications.

Study of the Velocity and Direction of Piezoelectric Robot Driven by Traveling Waves

A novel traveling wave piezoelectric actuated wheeled robot: design, theoretical analysis, and experimental investigation

A Piezoelectric-Actuated Robot Operating at Running and Swinging Hybrid Modes

Kinematics analysis of omni-directional precise miniature mobile robot

A Small and Agile Ring-Shaped Tripodal Piezoelectric Robot Driven by Standing and Traveling Mechanical Waves

Study on the computer control system for the piezoelectric traveling-wave motor

A Spatial 3-DOF Piezoelectric Robot and its Speed-Up Trajectory Based on Improved Stick-Slip Principle

Motion of a Legged Bidirectional Miniature Piezoelectric Robot Based on Traveling Wave Generation

A 3-DOF Piezoelectric Robot with Continuous Walking Gait Aiming at Cross-Scale Smooth Motion

Design and Experiments of a Small Resonant Inchworm Piezoelectric Robot

A double-beam piezoelectric robot based on the principle of two-mode excitation

A XY Transporting and Nanopositioning Piezoelectric Robot Operated by Leg Rowing Mechanism

Study on piezoelectric traveling wave rotary motor with high resolution

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source

Development of a 3-DOF Planar Monopod Piezoelectric Robot Actuated by Multidirectional Spatial Elliptical Trajectories

Development of a One-Legged Piezoelectric Robot with Agile Motion, High-Speed, and Large-Load Capabilities

Development of a Miniature Quadrupedal Piezoelectric Robot Combining Fast Speed and Nano-Resolution

A Snail-Inspired Traveling-Wave-driven Miniature Piezoelectric Robot

Research on Piezoelectric Driving Microminiature Three-Legged Crawling Robot

Manipulating the Moving Trajectory of Insect-Scale Piezoelectric Soft Robots by Frequency

Development of a Novel Long Range Piezoelectric Motor Based on Double Rectangular Trajectories Driving