Abstract:Li-rich manganese base oxides with a high specific capacity of nearly 300 mA h g–1 are acting as the most superior cathode material for high-energy density lithium-ion batteries. However, voltage decaying and poor rate capability critically restrict their applications. In order to solve this problem, the Na ion was used to dope into the lattice of the Li-rich manganese base oxides through solid-state reactions. All prepared samples are highly crystalline, and Na+ is uniformly distributed. The doping of Na+ does not adversely affect the parallel crystal plane structure. The charge–discharge capacities can be effectively increased by doping of Na ions. The rate performance of Li1.2Na0.03[Ni0.2464Mn0.462Co0.0616]O2 (LNa0.03NMC) is improved significantly, and the discharge capacities are 248, 234, 209, 190, 172, and 138 mA h·g–1 at 0.1, 0.2, 0.5, 1, 2, and 5 C, respectively. After 110 cycles of Li1.2Na0.03[Ni0.2464Mn0.462Co0.0616]O2 at 1 C, the reversible capacity only reduced from the initial 194.4–188.9 mA h·g–1 and only attenuates from 3.710 to 3.622 V of average discharge voltage. This work demonstrates that doping of Na ions not only stabilizes lattice layers of lithium-rich layered cathode but also facilitates the diffusion of Li ions in the crystal lattice.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01402?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01402</a>.SEM images of the LNMC and LNaxNMC; dQ/dV of LNMC and LNaxNMC after 50 rate performance cycle tests; ex situ XRD patterns of LNMC and LNa0.03NMC after 50th cycle; initial charge–discharge capacity and irreversible capacity; and Rct of the LNMC and LNaxNMC after the 1st and 110th cycles (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01402/suppl_file/ae0c01402_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Effects of chromium/fluorine co-doping on the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 cathode material for lithium-ion batteries

A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Enhanced electrochemical performance of F-doped Li<sub>1.2</sub>Mn<sub>4/6</sub>Ni<sub>1/6</sub>Co<sub>1/6</sub>O<sub>2.35</sub> cathode materials for Li-ion batteries

Enhanced Electrochemical Performance of F-doped Li1.2Mn4/6Ni1/6Co1/6O2.35 Cathode Materials for Li-ion Batteries

Heightening the long cycling stability and reducing oxygen loss of Li-rich cathode materials by Mo–F Co-doping for half/full lithium-ion batteries

Effect of Cationic (Na+) and Anionic (F−) Co-Doping on the Structural and Electrochemical Properties of LiNi1/3Mn1/3Co1/3O2 Cathode Material for Lithium-Ion Batteries

Improving the single crystal LiNi0.8Co0.1Mn0.1O2 cathode material performance by fluorine doping

Enhanced Electrochemical Performance of the Lithium-Manganese-Rich Cathode for Li-Ion Batteries with Na and F CoDoping

Synergistic Na+ and F− co-doping modification strategy to improve the electrochemical performance of Li-rich Li1·20Mn0·54Ni0·13Co0·13O2 cathode

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li3PO4 as cathode material for Lithium-ion batteries

Retarded phase transition by fluorine doping in Li-rich layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode material

Synergetic effects of Na+-Mo6+ co-doping on layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode for high performance lithium-ion batteries

Optimization of the electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode material by titanium doping

Synthesis and electrochemical performance of LiNi_(1/3)Mn_(1/3)Co_(1/3)O_2-zFz cathode materials for lithium ion batteries

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li<sub>3</sub>PO<sub>4</sub> as cathode material for Lithium-ion batteries

Cation and anion Co-doping synergy to improve structural stability of Li-and Mn-rich layered cathode materials for lithium-ion batteries

Impact of Cr Doping on the Voltage Fade of Li-Rich Mn-Rich Li 1.11 Ni 0.33 Mn 0.56 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 2 Positive Electrode Materials

Synergistic effect of uniform lattice cation/anion doping to improve structural and electrochemical performance stability for Li-rich cathode materials

Improving Electrochemical Properties by Sodium Doping for Lithium-Rich Layered Oxides

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability