Abstract:High-energy irradiation significantly increases the optical losses and noise coefficients of laser materials, leading to a substantial decrease in the slope efficiency or gain performance of laser output. To address this issue, we propose a strategy to enhance the radiation resistance of glasses/fibers by introducing phase interfaces. Based on the sol–gel method, through phase-separation techniques and high-temperature annealing treatments, silica-rich and phosphorus-rich phases were formed in erbium-ytterbium co-doped high-phosphorus silica glass, and nanoscale phase interfaces with specific densities, stability levels, and homogeneous distributions of doped elements were constructed between the phases. Using high-resolution transmission electron microscopy, nuclear magnetic resonance, and spectroscopic analyses, we tracked the evolution of the internal microstructure of the glasses at the atomic level. The findings confirmed that annealing effectively controlled the density of the phase interfaces formed. Under 1 kGy X-ray irradiation, glasses with effective phase interfaces exhibited significant reduction in radiation-induced attenuation (RIA) and improvement in photoluminescence intensity compared to pristine glasses. This indicated that effective phase interfaces could act as complex centers for irradiation-induced point defects, absorbing radiant energy and trapping these defects, thus mitigating high-energy radiation-induced damages. Furthermore, online irradiation tests on the Er 3+ /Yb 3+ co-doped silica fibers supported this result. Compared to pristine fiber, fibers annealed for 3 h and annealed for 20 h with different phase interfacial densities showed 45% and 73% lower RIA at 1080 nm, respectively.

Investigation of phase separation as a source of optical losses in IR glasses for fiber optics

Glass-based integrated optical splitters: Engineering oriented research

Phase Separation of Alkaline Earth Fluorosilicate Glass: A Strategy to Suppress Fluoride Evaporation

Phase-Separation and Crystallization in Fluorozirconate Glasses

Phase‐Separation Engineering of Glass for Drastic Enhancement of Upconversion Luminescence

Evolution of glass-based integrated optic devices

STUDY OF PHASE-SEPARATION IN NA2O-B2O3-SIO2 GLASSES BY TEM AND OPTICAL DIFFRACTION

Optical applications of glass-ceramics

Enhanced radiation resistance of Er3+/Yb3+ co-doped high-phosphorus silica glasses and fibers via phase-interface engineering

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Chalcogenide glass-based Low Loss Graded Index Photonic Crystal Fiber for non-linear applications in the Mid-IR regime

Preparation of especially pure Ge-Se glasses via germanium monoselenide for Mid-IR fiber optics

Some Aspects Of Phase-Separation In Glasses

Toward low-loss mid-infrared Ga2O3-BaO-GeO2 optical fibers

Ultralow-loss geometric phase and polarization shaping by ultrafast laser writing in silica glass

Raman scattering as a probe of intermediate phases in glassy networks

Manufacturing of GLS-Se glass rods and structured preforms by extrusion for optical fiber drawing for the IR region

Phase Separation Inducing Controlled Crystallization of Gese2-Ga2se3-Csi Glasses for Fabricating Infrared Transmitting Glass-Ceramics

Theoretical and Experimental Investigation of Al3+ Ion-Suppressed Phase-Separation Structures in Rare-Earth-Doped High-Phosphorus Silica Glasses

Phase-type Diffractive Micro-Optics Elements in Sulfur-Based Polymeric Glass by Femtosecond Laser Direct Writing

Effect of Introducing KNO3 on the Preparation of Athermal Fluorophosphate Glass and Investigation on Its Thermo-Optical Property