Abstract:This work is dedicated to the development of an on-line monitoring system of SF6 decomposition in electrical devices (SF 6 DcpMS) in order to evaluate the health condition of the devices in real time. The feature decomposition, SO 2 , and SF 6 purity are continuously monitored. Considering the oxidation-reduction reactions of SO 2 electrochemical sensor during detection, the methodology of utilizing the air in the electrical device is proposed based on the tests of serving devices. And it is proved via tests that electrochemical sensors can be applied into SF 6 DcpMS. Besides, infrared detector is employed to detect SF 6 purity. Sampling method of SF 6 in electrical devices is described. There are three keys in the sampling device design for the on-line monitoring system: -- Sensor working environment: The rating pressure is one atmospheric pressure for sensor working. Therefore, a gas chamber is constructed, in which the suitable environment for sensor is completed via a pressure regulator and a pressure sensor. At the same time, an appropriate control method is scheduled. Gas in the chamber is continuously replaced with that in the electrical device to ensure detection accuracy within an acceptable range. -- SO 2 adsorption feature: The monitoring accuracy is seriously influenced by the adsorption feature of SO 2 . As we known, flowing gas can decrease SO 2 adsorption feature. So, a micro bump is designed in the gas chamber, which can ensure the gas flowing at the speed of 200ml/min. -- Sample gas back into electrical devices: In order to avoid the gas cause harm to humans, the gas leakage is not allowed in the on-line monitoring system, and the sample gas must be sent back to the electrical device after detection is accomplished. Sample gas back into electrical devices is realized via a bump and a check valve with adjustable cracking pressure. The first SF 6 DcpMS in China has been successfully put into service in Zunyi substation, and its performance has been proved out.

Real-Time Monitoring of Air Discharge in a Switchgear by an Intelligent NO 2 Sensor Module

Real-Time Monitoring of Air Discharge in a Switchgear by an Intelligent NO2 Sensor Module.

Discharge Fault Detection of Dry Air Switchgear Based on ZnO-MoS2 Gas Sensor

Portable Device Based on Micro-Sensor Array for the Detection of Air Discharge

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

Air-discharge Decomposition Gases Detected by Sensor Array with Contrast Learning

Diagnosis of Partial Discharge Based on the Air Components for the 10 kV Air-Insulated Switchgear

Partial Discharge Monitoring on Metal-Enclosed Switchgear with Distributed Non-Contact Sensors.

Online Monitoring of Partial Discharge in High Voltage Switchgear Using a Differential Electric Field Sensor

An Online Monitoring Terminal for Partial Discharge of Switch Cabinets Based on TEV Method

Air-Discharge Decomposition Gases Detected by Sensor Array with Depthwise Separable Convolution

A Real-Time IR-Fusion Switchgear Contact Monitoring System (SCMS).

Development of a Novel Comprehensive Online Monitor for MV Switchgears Based on Modbus

Diagnosis of Spark Discharge Faults by Characteristic Gas Composition Detection

Partial discharge detection, diagnosis, and location technology based on a novel transient earth voltage-ultrasonic integrated sensor used for switchgear equipment

Research on Partial Discharge Monitoring System of Switchgear Based on Wireless Distributed TEV Sensors

An On-Line Monitoring System of SF6 Decomposition in Electrical Devices

CNT-based Sensor Array for Selective and Steady Detection of SO2 and NO

Present Situation and Development of Internal Sensors for Ultra-high Frequency Detection in Gas Insulated Switchgear

A Novel Composite Sensor for UHF Partial Discharge and Gas State Measurement in GIS

Highly Sensitive Gas Sensor for Detection of Air Decomposition Pollutant (CO, NO x ): Popular Metal Oxide (ZnO, TiO 2 )-Doped MoS 2 Surface