Abstract:Sulfur hexafluoride (SF6) is widely used in electrical equipment because of its excellent insulating properties. The type of internal fault in the power system can be identified by detecting SF6 decomposition products. In this manuscript, we report a novel sensing material based on octahedral Co3O4-modified NiSnO3 nanofibers synthesized via a two-step process based on electrospinning followed by a hydrothermal method for detecting the SF6 decomposition products. From the evaluation of various characterization techniques, it was determined that the Co3O4 octahedra adhered inflexibly to the surface of the NiSnO3 nanofibers, which consist of smaller particles and provide a huge surface area for the adsorption of an enormous amount of gas species. Planar-type chemical gas sensors were devised, and their gas detecting performance against SF6 decomposition products was systematically investigated. A comparison of the sensitivity properties of different amounts of charged Co3O4 octahedra in NiSnO3 nanofibers shows that the S-2-based Co3O4@NiSnO3 composite has a high selectivity for 100 ppm SO2F2 gas with a high sensing response of 22.5 at a relatively low temperature of 50 °C with a moderate response/recovery interval (∼200/∼268 s) and a low detection limit (5 ppm) over other interfering gases, such as SOF2, SO2, and H2S. Interestingly, the sensing properties of the fabricated sensors based on the Co3O4@NiSnO3 composites for the SO2F2 gas were improved in terms of lower operating temperatures, higher gas responses, and mild response/recovery intervals, which could be attributed to the unique microstructure effect, the catalytic influence of Co3O4 octahedra, and the creation of p/n junctions to increase the charge transfer and diffusion rate within the catalytic assembly of the sensor materials. This work highlights the importance of the heterostructure design in the construction of high-performance gas sensors for the real-time detection of SF6 decomposition products.

Highly Sensitive Gas Sensor for Detection of Air Decomposition Pollutant (CO, NO x ): Popular Metal Oxide (ZnO, TiO 2 )-Doped MoS 2 Surface

Discharge Fault Detection of Dry Air Switchgear Based on ZnO-MoS2 Gas Sensor

Low-Temperature Detection of Sulfur-Hexafluoride Decomposition Products Using Octahedral Co<sub>3</sub>O<sub>4</sub>-Modified NiSnO<sub>3</sub> Nanofibers

Highly sensitive and recoverable room-temperature NO<sub>2</sub> gas detection realized by 2D/0D MoS<sub>2</sub>/ZnS heterostructures with synergistic effects

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

High-Performance H2S Sensors to Detect SF6 Leakage

Engineering surfaces to improve xylene gas sensing performance in ZnCo2O4 porous architectures

Low-Temperature Detection of Sulfur-Hexafluoride Decomposition Products Using Octahedral Co 3 O 4 -Modified NiSnO 3 Nanofibers

MoS2/MoO3 Heterojunctions Enabled by Surface Oxidization of MoS2 Nanosheets for High-Performance Room-Temperature NO2 Gas Sensing

Chemiresistive detection of SO 2 in SF 6 decomposition products based on ZnO nanorod/MoS 2 nanoflower heterojunctions: experimental and first-principles investigations

Volatile Organic Compounds Gas Sensors Based on Molybdenum Oxides: A Mini Review

Gas-Sensing Performance of Metal Oxide Heterojunction Materials for SF6 Decomposition Gases: A DFT Study

Portable Device Based on Micro-Sensor Array for the Detection of Air Discharge

High-Performance Ppb Level NO2 Gas Sensor Based on Colloidal SnO2 Quantum Wires/Ti3C2Tx MXene Composite

MoO2 Pump-Enhanced Flexible TiO2 Nanojungle-Based Chemiresistors for Rapid Room-Temperature Detection of H2S at Parts-per-Billion Levels

Conductometric NO2 Gas Sensors Based on MOF-derived Porous ZnO Nanoparticles

SnO2 Highly Sensitive CO Gas Sensor Based on Quasi-Molecular-Imprinting Mechanism Design

NiO-CuO Hydrangeas-Like Composite Derived from Ni/Cu Bimetallic MOFs for Sensitive Detection of H2S at Room Temperature

Study on Pd-MoTe2 monolayer for adsorption and sensing of air decomposition products in air-insulated switchgear

3D-Multilayer MoS2 Nanosheets Vertically Grown on Highly Mesoporous Cubic In2O3 for High-Performance Gas Sensing at Room Temperature

Edge-Enriched Mo2TiC2Tx/MoS2 Heterostructure with Coupling Interface for Selectively NO2 Monitoring