Abstract:Ever more extreme environments in advancing industrial applications motivate efforts to design new generation of alloys with excellent mechanical properties. High entropy alloys (HEAs) are considered as promising candidates for bearing extreme loadings. However, the reported results of correspondence between extremely mechanical behaviors and micromechanisms are still in infancy. Here we showed mechanical responses over wide strain rate and temperature ranges and microscopic observations recovered from dynamic uniaxial tension of face-centered cubic (FCC) HEA to reveal plasticity mechanisms transition under various loading conditions. In particular, with an increasing strain during the extreme dynamic tension a sequence of mechanisms, including twinning, detwinning-induced localization, nanoscale body-centered cubic (BCC) phase transformation and symbiotic amorphization, were progressively activated for continued plasticity. At strains over 35%, twin boundaries hindrance to localized band propagation and more dislocations emitting from BCC phases even collectively caused a second sharp rise in hardening. Additionally, the plasticity kept increasing during crystal to amorphization transition, which should be promoted by severe lattice distortion in super-dense dislocations areas. By combining large scale molecular dynamic simulations, the causes of phase transition to BCC lattice structure or even to amorphous bands were explained in depth. The thorough uncovering of these brand-new mechanisms can help understand the plasticity and amorphization of HEAs under the extreme loadings.

Elastic–Plastic Fracture Toughness of Wrought Dual-Phase Non-equiatomic High-Entropy Alloy (HEA) for Structural Applications

Elastic-plastic fracture toughness of metastable, dual-phase, Fe49.5Mn30Co10Cr10C0.5, high entropy alloy (HEA)

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Fracture of Void-Embedded High-Entropy-Alloy Films: A Comprehensive Atomistic Study

Microstructure and mechanical properties of Al-Fe-Co-Cr-Ni high entropy alloy fabricated via powder extrusion

Realizing strength-ductility combination of Fe3.5Ni3.5Cr2MnAl0.7 high-entropy alloy via coherent dual-phase structure

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Hierarchical toughening mechanisms in face centered cubic CoCrFeMnNi high-entropy alloy at room temperature and cryogenic temperatures

Microstructure and Properties of a Co-Free Fe50mn27ni10cr13 High Entropy Alloy

Break the strength and ductility trade-off in novel NbC reinforced Fe40.5(CoCr)25Mn17.5Ni10Si5 high entropy alloy

Nanoindentation behavior of high entropy alloys with transformation-induced plasticity

Crack growth and fracture mechanics of CuCrFeNiCo high-entropy alloy during tension testing

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys

A Dual-Phase Fe-Co-Ni-Cr-Mn High Entropy Alloy Thin Film with Superior Strength and Corrosion-Resistance

FCC-BCC Phase Transformation Induced Simultaneous Enhancement of Tensile Strength and Ductility at High Strain Rate in High-Entropy Alloy

In-situ microstructural evolution during tensile loading of CoCrFeMnNi high entropy alloy welded joint probed by high energy synchrotron X-ray diffraction

Mechanical properties and fracture mechanism of as-cast MnFeCoCuNi high-entropy alloys

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Deformation and damage of equiatomic CoCrFeNi high-entropy alloy under plate impact loading

Abnormal hardening and amorphization in an FCC high entropy alloy under extreme uniaxial tension

Microstructure Evolution and Tensile Property of a CuMnFeCoNi High-Entropy Alloy During Thermomechanical Treatment