Abstract:Fiber Bragg grating (FBG) sensors have long been thought of as the ideal sensors for structural health monitoring (SHM) due to their small size, light weight, ability to be embedded and ability to be multiplexed. So, FBG sensors have been commonly used for strain based SHM. In recent times, a renewed interest is seen in the use of FBG sensors for guided wave (GW) measurements using the edge filtering approach. Unfortunately, more wide spread research is limited by the steep learning curve. Also, the use of FBG in real applications is still in its infancy due to the need of calibration of the system when the ambient temperature conditions change. This paper precisely tries to address these two shortcomings. For overcoming the steep learning curve, a detailed discussion on the hardware for the FBG based GW sensing is provided. Following the discussion a detailed trouble-shooting guide is developed based on the immense experience of the authors in this field. This exercise will allow easier adoption of the technique and stimulate more research in the topic. The exercise also allows us to highlight the safeguards and the features that need to be included in the self-calibrating system. Once the design parameters are established a self-calibrating autonomous FBG based sensing system is developed. The developed system is tested in ambient conditions over an 18 hour period capturing the ambient temperature changes. The system is also tested in a larger temperature range (25 C to 65 C). The results indicate that indeed the self-calibrating system works effectively. Such a 'smart' autonomous system for guided wave sensing has not been presented before and is the key novelty of the presented work. Furthermore, the detailed discussions and troubleshooting guide will help introduce more people to this field of study stimulating more research.

Design and development of an economical temperature compensated bidirectional fiber Bragg grating flow sensor

Novel Integrated Optical Fiber Sensor for Temperature, Pressure and Flow Measurement

Self-compensating Fiber Optic Flow Sensor Based on Dual Fiber Bragg Gratings

Novel target type flowmeter based on a differential fiber Bragg grating sensor

A Small Probe-Type Flowmeter Based on the Differential Fiber Bragg Grating Measurement Method

A Novel Fast Response and High Precision Water Temperature Sensor Based on Fiber Bragg Grating

Simultaneous Measurement of Pressure and Temperature Using a Single Fiber Bragg Grating

Hot Cavity Optical Fiber Fabry–Perot Interferometer As a Flow Sensor with Temperature Self-Calibrated

"DISCRIMINATION OF TEMPERATURE AND STRAIN INTERFERENCE IN FBG SENSORS USING TAPERED OPTICAL FIBER SENSOR "

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

Fiber Bragg grating sensors for monitoring of physical parameters: a comprehensive review

A Temperature Self-Adapting Fiber Bragg Grating Dynamic Sensor System

Developing self-calibrating system for fiber Bragg grating based guided wave sensing under changing temperature conditions

Temperature-Insensitive Fiber Bragg Grating Based Tilt Sensor with Large Dynamic Range

Fiber Bragg grating temperature sensor for marine application

Optofluidic Temperature and Pressure Measurements with Fiber Bragg Gratings Embedded in Microfluidic Devices

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

In-Bulk Temperature Profile Mapping Using Fiber Bragg Grating in Fluids

Multi-parameter sensor based on cascaded multicore FBGs and an FPI for bending, temperature and pressure measurements

Optical Sensor of Thermal Gas Flow Based on Fiber Bragg Grating