Abstract:Lithium-ion batteries are widely used today in powering devices from portable electronics to electric vehicles. Despite their great success, this battery chemistry relies on organic solvent-based liquid electrolytes which are highly flammable, leading to major safety concerns. In contrast, solid-state batteries, which are based on solid-state electrolytes, are regarded to have much better safety characteristics and potentially higher energy density than the conventional lithium-ion batteries. Solid-state electrolytes usually include ceramics, polymers, gels, and composites. Among them, polymer materials have attracted considerable attention due to their great interfacial contact, flexibility, and easy fabrication. In particular, polyvinylidene fluoride (PVDF) polymer electrolyte is a promising candidate as it can potentially provide a high voltage window and enable high energy density solid-state batteries. However, the current PVDF-based polymer electrolyte is still not compatible with high voltage cathodes, such as layered lithium transition metal oxides and the interaction between the salt and PVDF polymer has not been fully elucidated. We have systematically studied the PVDF-based electrolytes with different salts and salt combinations, including lithium bis(fluorosulfonyl)imide (LiFSI), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and lithium bis(pentafluoroethanesulfonyl)imide (LiBETI). The optimized electrolyte delivers excellent performance for solid-state Li||LiFePO 4 cells, achieving a specific capacity of over 150 mAh/g and lasting more than 50 cycles with over 99% capacity retention. Similar tests have also been applied to lithium nickel manganese cobalt oxides (NMC), and the preliminary results show promising cycling stability and capacity retention. In addition to electrochemical study, we employed a range of synchrotron-based X-ray techniques, including diffraction, pair distribution function analysis, and absorption spectroscopy, to investigate the interactions between the polymer and lithium salt in the polymer electrolytes. This knowledge will provide valuable information for designing new polymer electrolyte systems. Acknowledgments: The work at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. Department of Energy through the Advanced Battery Materials Research (BMR) Program under contract DE-SC0012704. This research used beamline 23-ID-2 and 28-ID-2 of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704.

Cellulose acetate-promoted polymer-in-salt electrolytes for solid-state lithium batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

poly(vinylidene fluoride)-based dual-salt composite polymer electrolytes for superior room-temperature solid-state lithium batteries

Solution-processed poly(vinylidene difluoride)/cellulose acetate/Li1+xAlxTi2-x(PO4)3 composite solid electrolyte for improving electrochemical performance of solid-state lithium-ion batteries at room temperature

Localized High Concentration Polymer Electrolyte Enabling Room Temperature Solid-State Lithium Metal Batteries with Stable LiF-rich Interphases

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Composite polymer electrolyte facilitated by enhanced amorphousity and Li+ conduction using LaFeO3-embedded PVDF-HFP for solid-state lithium metal battery

Polyester-enhanced poly (cyclic carbonate-fluoride)-based polymer electrolyte for stable circulating solid lithium batteries

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

Organic Cationic-Coordinated Perfluoropolymer Electrolytes with Strong Li+-Solvent Interaction for Solid State Li-Metal Batteries

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Formation of Stable Interphase of Polymer-in-Salt Electrolyte in All-Solid-State Lithium Batteries

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Solid-State, Single-Ion Conducting, Polymer Blend Electrolytes with Enhanced Li + Conduction, Electrochemical Stability, and Limiting Current Density

Ultrathin Li7La3Zr2O12@PAN composite polymer electrolyte with high conductivity for all-solid-state lithium-ion battery

Deep Eutectic Solvent‐Based Solid Polymer Electrolytes for High‐Voltage and High‐Safety Lithium Metal Batteries

Electrochemical and Structural Study on PVDF-Based Polymer Electrolytes for Solid-State Batteries

Pendulum-swing coordination boosting "liquid-like" Li-ion conduction within asymmetric lamellar fillers for solid polymer electrolytes

Composite Electrolyte with Self‐inserted Structure and All‐trans F Conformation Provides Fast Li+ Transport for Solid‐state Li Metal Batteries

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries