Abstract:Undesired reactions at the interface between a transition metal oxide cathode and a nonaqueous electrolyte bring about challenges to the performance of Li-ion batteries in the form of compromised durability. These challenges are especially severe in extreme conditions, such as above room temperature or at high potentials. The ongoing push to increase the energy density of Li-ion batteries to break through the existing barriers of application in electric vehicles creates a compelling need to address these inefficiencies. This goal requires a combination of deep knowledge of the mechanisms underpinning reactivity, and the ability to assemble multifunctional electrode systems where different components synergistically extend cycle life by imparting interfacial stability, while maintaining, or even increasing, capacity and potential of operation. The barriers toward energy storage at high density apply equally in Li-ion, the leading technology in the battery market, and in related, emerging concepts for high energy density, such as Na-ion and Mg-ion, because they also conceptually rely on electroactive transition metal oxides. Therefore, their relevance is broad and the quest for solutions inevitable. In this Account, we describe mechanisms of reaction that can degrade the interface between a Li-ion battery electrolyte and the cathode, based on an oxide with transition metals that can reach high formal oxidation states. The focus is placed on cathodes that deliver high capacity and operate at high potential because their development would enable Li-ion battery technologies with high capacity for energy storage. Electrode-electrolyte instabilities will be identified beyond the intrinsic potential windows of stability, by linking them to the electroactive transition metals present at the surface of the electrode. These instabilities result in irreversible transformations at these interfaces, with formation of insulating layers that impede transport or material loss due to corrosion. As a result, strategies that screen the reactive surface of the oxide, while reducing the transition metal content by introducing inactive ions emerge as a logical means toward interfacial stability. Yet they must be implemented in the form of thin passivating barriers to avoid unacceptable losses in storage capacity. This Account subsequently describes our current ability to build composite structures that include the active material and phases designed to address deleterious reactions. We will discuss emerging strategies that move beyond the application of such barriers on premade agglomerated powders of the material of interest. The need for these strategies will be rationalized by the goal to effectively passivate all interfaces while fully controlling the chemistry that results at the surface and its homogeneity. Such outcomes would successfully minimize interfacial losses, thereby leading to materials that exceed the charge storage and life capabilities possible today. Practically speaking, it would create opportunities to design batteries that break the existing barriers of energy density.

Interfacial Degradation and Optimization of Li‐rich Cathode Materials †

A Review of Degradation Mechanisms and Recent Achievements for Ni‐Rich Cathode‐Based Li‐Ion Batteries

Critical review on the degradation mechanisms and recent progress of Ni-rich layered oxide cathodes for lithium-ion batteries

Mechanisms of Degradation and Strategies for the Stabilization of Cathode-Electrolyte Interfaces in Li-Ion Batteries

Developments in Surface/Interface Engineering of Ni‐Rich Layered Cathode Materials

Insights for Understanding Multiscale Degradation of LiFePO4 Cathodes

Interfacial-engineering-enabled High-Performance Li-rich Cathodes

A review on cathode materials for advanced lithium ion batteries: microstructure designs and performance regulations

Eliminating interfacial O-involving degradation in Li-rich Mn-based cathodes for all-solid-state lithium batteries.

Research progress on the surface/interface modification of high-voltage lithium oxide cathode materials

Structure modification of Ni-rich layered oxide cathode toward advanced lithium-ion batteries

The synthesis and modification of LiFePO4 lithium-ion battery cathodes: a mini review

Recent Progress and Perspectives of Defective Oxide Anode Materials for Advanced Lithium Ion Battery

Recent Advances in Electrolytes for High-Voltage Cathodes of Lithium-Ion Batteries

Mitigating the Interfacial Degradation in Cathodes for High Performance Oxide-Based Solid-State Lithium Batteries.

High-Efficiency Electrolyte for Li-Rich Cathode Materials Achieving Enhanced Cycle Stability and Suppressed Voltage Fading Capable of Practical Applications on a Li-Ion Battery

Strategies of Removing Residual Lithium Compounds on the Surface of Ni‐Rich Cathode Materials †

Electrolyte Therapy for Improving the Performance of LiNi0.5Mn1.5O4 Cathodes Assembled Lithium-Ion Batteries

Recent Advance in Mn-based Li-rich Cathode Materials: Oxygen Release Mechanism and Its Solution Strategies Based on Electronic Structure Perspective, Spanning from Commercial Liquid Batteries to All-Solid-state Batteries

Regulating the Performance of Lithium-Ion Battery Focus on the Electrode-Electrolyte Interface

Interfacial challenges towards stable Li metal anode