Abstract:Ni‐rich cathode materials have become one of the most promising cathode materials for advanced high‐energy Li‐ion batteries (LIBs) owing to their high specific capacity. However, Ni‐rich cathode materials are sensitive to the trace H2O and CO2 in the air, and tend to react with them to generate LiOH and Li2CO3 at the particle surface region (named residual lithium compounds, labeled as RLCs). The RLCs will deteriorate the comprehensive performances of Ni‐rich cathode materials and make trouble in the subsequent manufacturing process of electrode, including causing low initial coulombic efficiency and poor storage property, bringing about potential safety hazards, and gelatinizing the electrode slurry. Therefore, it is of considerable significance to remove the RLCs. Researchers have done a lot of work on the corresponding field, such as exploring the formation mechanism and elimination methods. This paper investigates the origin of the surface residual lithium compounds on Ni‐rich cathode materials, analyzes their adverse effects on the performance and the subsequent electrode production process, and summarizes varied kinds of feasible methods for removing the RLCs. Finally, we propose a new research direction of eliminating the lithium residuals after comparing and summing up the above. We hope this work can provide a reference for alleviating the adverse effects of residual lithium compounds for Ni‐rich cathode materials' industrial production.This article is protected by copyright. All rights reserved.

What problem does this paper attempt to address?

The paper primarily investigates the issue of residual lithium compounds (RLCs) on the surface of Ni-rich cathode materials. Specifically, the paper aims to address the following key issues: 1. **Understanding the formation mechanism of RLCs**: The paper explores the principles behind the formation of RLCs on the surface of Ni-rich cathode materials, including the process where excess lithium ions react with trace amounts of water and carbon dioxide in the air to form lithium carbonate (Li2CO3) and lithium hydroxide (LiOH). 2. **Analyzing the impact of RLCs on performance**: The paper elaborates on the negative effects of RLCs on the electrochemical performance, structural stability, safety, and subsequent manufacturing processes of cathode materials, such as reduced initial Coulombic efficiency, deteriorated storage performance, and battery swelling. 3. **Summarizing methods to remove RLCs**: The paper summarizes several effective methods for removing RLCs, including washing methods (e.g., washing with water or ethanol), surface coating methods (e.g., surface treatment using hydrophobic organic molecules like polydimethylsiloxane), surface structure design, and other treatment methods. 4. **Proposing new research directions**: Based on the comparison and summary of existing methods, the paper proposes future research directions to further mitigate the adverse effects of RLCs in the industrial production of Ni-rich cathode materials. In summary, the paper aims to systematically explain the formation mechanism of RLCs on the surface of Ni-rich cathode materials and their impact on material performance, and to summarize effective removal strategies, providing a reference for improving the application performance of these materials in lithium-ion batteries.

Strategies of Removing Residual Lithium Compounds on the Surface of Ni‐Rich Cathode Materials †

Formation Mechanism and Removal Strategy of Residual Lithium Compounds on Nickel-Rich Cathode Materials

The Formation, Detriment and Solution of Residual Lithium Compounds on Ni-Rich Layered Oxides in Lithium-Ion Batteries

Enhanced Electrochemical Performance of Ni-Rich Cathodes by Neutralizing Residual Lithium with Acid Compounds

Practical Surface-Reconstruction Strategy Based on Self-Reactive Interface Design Enables Ultralong Cyclability of Commercial Cathodes for Lithium-Ion Batteries

Alleviating Surface Degradation of Nickel-Rich Layered Oxide Cathode Material by Encapsulating with Nanoscale Li-Ions/Electrons Superionic Conductors Hybrid Membrane for Advanced Li-Ion Batteries.

Formation and Effect of Residual Lithium Compounds on Li-Rich Cathode Material Li-1.35[Ni0.35Mn0.65]O-2

Removing lithium residues via H3BO3 washing and concurrent in-situ formation of a lithium reactive coating on Ni-rich cathode materials toward enhanced electrochemical performance

Modifying Surface Chemistry to Enhance the Electrochemical Stability of Nickel‐Rich Cathode Materials

Clean the Ni-Rich Cathode Material Surface With Boric Acid to Improve Its Storage Performance

Advances and Prospects of Surface Modification on Nickel‐Rich Materials for Lithium‐Ion Batteries †

Enhanced electrochemical properties of a LiNiO2-based cathode material by removing lithium residues with (NH4)2HPO4

Mitigating the Surface Reconstruction of Ni-Rich Cathode <i>via</i> P2-Type Mn-Rich Oxide Coating for Durable Lithium Ion Batteries

Developments in Surface/Interface Engineering of Ni‐Rich Layered Cathode Materials

Advances and Prospects of Surface Modification on Nickel-Rich Materials for Lithium-Ion Batteries<SUP>?</SUP>

Strategies to Stabilize the Cathode/Electrolyte Interface in Ni-Rich NMC Based Li-Ion Batteries

Removing the Intrinsic NiO Phase and Residual Lithium for High-Performance Nickel-Rich Materials

Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries

Coating Strategies of Ni-rich Layered Cathode in LIBs

Effective Strategies for Improving the Cycle Life of Ni-Rich LiNixMnyCozO2 Cathodes for Lithium-Ion Batteries

Near-surface reconstruction in Ni-rich layered cathodes for high-performance lithium-ion batteries