Abstract:It is seen that with the reduction in land areas owing to the floating-rings featured grooves, there is reduction in the load capacities and bearing torques of the oil-films, which have an influence on the nonlinear oscillations of turbocharger rotors. In the present paper, the impact of the reduced load capacities and bearing torques caused by circumferential or/and axial grooves in full-floating-ring bearings on the nonlinear oscillations of turbocharger rotors is investigated. The numerical solution of the Reynolds equation for full-floating-ring bearings with grooves by means of a finite difference or finite element approach imposes a prohibitive simulation times, sine in every time-integration step a direct discretization of the Reynolds equation has to be solved simultaneously with the rotor model. To be able to perform transient simulations, a computationally efficient full-floating-ring bearing model is mandatory. To surmount this problem, a very time-efficient but rather precise method is proposed. The major point of the proposed method is the manipulation of the Reynolds equation to allow a speed parameter varying within (−1, +1) to reflect the relative weights of the journal and floating ring’s rotation and squeezing effects. Given the diameter-to-length ratio of each fluid film, groove widths, and boundary conditions, the fluid force databases can be easily established by the finite difference method. During the transient response analysis, the required fluid forces and bearing torques from each film can be evaluated by interpolation using the existent forces and torques of the closest points in the databases. Using transient simulations with the proposed method, the effect of circumferential or/and axial grooves in full-floating-ring bearings on the amplitudes and frequencies of the nonlinear oscillations of turbocharger rotors is qualitatively investigated. It is shown that the reduction of the load capacities and bearing torques due to grooves exert a large influence on the nonlinear rotor oscillations.

Coupling analysis of tribological and dynamical behavior for a thermal turbulent fluid lubricated floating ring bearing-rotor system at ultra-high speeds

Lubrication and stability analysis of nonlinear rotor-bearing system

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Dynamic Analysis of Turbocharger Rotor Bearing with an Integrated Three Dimensional Thermohydrodynamic Model

Dynamic Load and Thermal Coupled Analysis for the Inter-Shaft Bearing in a Dual-Rotor System

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Numerical Investigation of Subsynchronous Vibration in Floating Ring Bearings

Transient nonlinear dynamics of the rotor system supported by low viscosity lubricated bearing

Experimental and numerical investigation on thermodynamic performance of full-floating ring bearings with circumferential oil groove

Numerical and Experimental Investigation on Thermohydrodynamic Performance of Turbocharger Rotor-Bearing System

Nonlinear dynamic behavior of a water-lubricated hybrid bearing-rotor system

Effects of Circumferential and Axial Grooves on the Nonlinear Oscillations of the Full Floating Ring Bearing Supported Turbocharger Rotor

Dynamic characteristics analysis of an elliptical bearing-rotor coupled system

Dynamic Analysis of High Speed Turbine Rotor with Foil Bearing

Coupling study on dynamics and TEHL behavior of high-speed and heavy-load angular contact ball bearing with spinning

Numerical Investigation of Air–Oil–Thermal Coupling Mechanism in Floating Ring Bearings

Dynamic analysis of a high-speed micro compressor supported by spiral-grooved hydrodynamic air bearing

Multi-time scale thermal tribological dynamics coupling model of the helicopter intermediate reducer under severe loss of lubrication

Transient Analysis of A Rotor-Journal Bearing System under Large and Dynamic Loads

Stability of rotor system supported by sliding bearing with turbulent effect

Oil Film Whirl Dynamic Characteristics and Influence Factors in High Speed Rotor-bearing System