Abstract:A major problem of additively manufactured parts using laser powder bed fusion (LPBF) is the as-built high surface roughness. The poor surface finishing is detrimental to the mechanical and electrochemical properties of the parts. In this work, we present systematic investigations on surface roughness reduction of LPBF produced nickel-based superalloy Hastelloy X (HX) using electropolishing. The electrolyte used in this study is an environmentally safe deep eutectic solvent (DES) comprising a eutectic mixture of choline chloride and ethylene glycol in a 1:2 M ratio, respectively. Two different groups of LPBF HX parts separated for the purpose of electropolishing the external and internal surface were prepared. The results show that both the external and internal surface roughness can be effectively reduced using electropolishing in DES. For the parts with the external surface electropolished for 5 min, a surface roughness reduction down to 1.2 μm (Ra) with a bright and reflective surface appearance was achieved. This is a significant improvement in comparison to the high as-built surface roughness of 10.3 μm (Ra) with a dull and non-reflective surface appearance. For the internal surface electropolishing, the surface quality of a 3 mm diameter internal channel in an angled LPBF HX cylindrical tube was successfully enhanced. The DES electropolishing efficiency on LPBF HX was investigated using weight reduction as a function of the electropolishing time, and the microstructure of the electropolished LPBF HX was studied. A further improvement of the electrochemical properties for the electropolished surface was revealed by anodic polarization tests and electrochemical impedance tests. The electropolished surface was also revealed to be more hydrophobic than the as-built surface by water contact angle tests, which is beneficial to the corrosion resistance. The findings herein demonstrate the surface quality of the LPBF produced HX can be effectively improved using electropolishing, and also showed the feasibility of using DES as a promising alternative electrolyte to the conventional hazardous acid mixtures.

Optimization of Electropolishing Process Using Taguchi Robust Design for UNS N08367 in a Mixed Solution of Sulfuric Acid and Phosphoric Acid

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

Parameters Optimization for Electropolishing Titanium by Using Taguchi-Based Pareto ANOVA

In Situ Analysis of the Effect of Ultrasonic Cavitation on Electrochemical Polishing of Additively Manufactured Metal Surfaces

Electropolishing of 316L Stainless Steel for Anticorrosion Passivation

Electrochemical Polishing of 7075 Al Alloy in Phosphoric Acid

Electrochemical Analysis of the Slurry Composition for Chemical Mechanical Polishing of Flexible Stainless-Steel Substrates

Electrochemical characteristics and damage mechanism in scrubber washing water of UNS N08367 with plasma ion nitriding and electropolishing

DEVELOPNENT OF THE TECHNOLOGICAL PARAMETERS OF ELECTROCHEMICAL POLISHING OF THE ST 20 GRADE STEEL

Electropolishing Stainless Steel Optimization Using Surface Quality, Dimensional Accuracy, and Electrical Consumption Criteria

Optimization of the process for combined electrochemical and mechanical polishing of 45 steel

Strategy for Surface Post-Processing of AISI 316L Additively Manufactured by Powder Bed Fusion Using Ultrasonic Nanocrystal Surface Modification

Effect of Process Parameters on the Roughness and Wetting Characteristics of SS304 Surfaces Using Electrolytic and Plasma Electrolytic Polishing Techniques

Process Parameters Optimization of Electric Plating Ni-P Alloy Coating

Hybrid post-processing effects of electropolishing-assisted magnetic abrasive finishing using CNTs-Co abrasive on stainless steel 316 surface

Optimization of Desulfurization Process via Choline Phosphotungstate Coupled with Persulfate Using Response Surface Methodology

Optimization of Design of Experiment for Chemical Mechanical Polishing of A 12-Inch Wafer

Material Removal and Surface Modification of Copper under Ultrasonic-Assisted Electrochemical Polishing

Investigation of surface roughness post-processing of additively manufactured nickel-based superalloy Hastelloy X using electropolishing

The Taguchi Approach in Studying and Optimizing the Electro-Fenton Oxidation to Reduce Organic Contaminants in Refinery Wastewater Using Novel Electrodes

Effect of methanolic plant extract on copper electro-polishing in ortho-phosphoric acid