Abstract:Non-destructive tests working at lower microwave frequencies have large advantages of dielectric material penetrability, lower equipment cost, and lower implementation complexity. However, the resolution will become worse as the work frequencies become lower. Relying on designing the structure of high field confinement, this study realizes a simple complementary spiral resonators (CSRs)-based near-field probe for microwave non-destructive testing (NDT) and imaging around 390 MHz (λ = 769 mm) whereby very high resolution (λ/308, 2.5 mm) is achieved. By applying an ingenious structure where a short microstrip is connected to a microstrip ring to feed the CSR, the probe, that is a single-port microwave planar circuit, does not need any extra matching circuits, which has more application potential in sensor arraying compared with other microwave probes. The variation of the electric field distribution with the standoff distance (SOD) between the material under test and the probe are analyzed to reveal the operation mechanisms behind the improved sensitivity and resolution of the proposed probe. Besides, the detection abilities of the tiny defects in metal and non-metal materials are demonstrated by the related experiments. The smallest detectable crack and via in the non-metal materials and the metal materials are of a λ/1538 (0.5 mm) width, a λ/513 (1.5 mm) diameter, a λ/3846 (0.2 mm) width and a λ/513 (1.5 mm) diameter, respectively. Moreover, to further evaluate the performance of the proposed probe, the defects under skin layer in the multilayer composite materials and the defects under corrosion in the carbon steel are inspected and imaged. Due to lower work frequency, high resolution, outstanding detection abilities of tiny defects, and large potentials in sensor arraying, the proposed probe would be a good candidate for microwave NDT and imaging.

Surface H‐field mapping of a microwave limiter chip based on quantum diamond probe

Surface H‐field mapping of a GaAs single pole double throw switch chip based on quantum diamond probe

Quantum near field probe for integrated circuits electromagnetic interference at wafer level

Experimental study on the characteristics of near‐field distribution of chips based on nano‐diamond quantum magnetometer

Micron-sized fiber diamond probe for quantum precision measurement of microwave magnetic field

Toward Characterizing 3-D Microwave Field With Microscale Resolution Using Nitrogen-Vacancy Centers in Diamond

Application of single photon counter module in weak signal detection for RF chip scanning using a quantum near field probe

Optimized microwave sensing in broad frequency range by a fiber diamond probe

Magnetic Field Fingerprinting of Integrated Circuit Activity with a Quantum Diamond Microscope

A fiber based diamond RF B-field sensor and characterization of a small helical antenna

Microwave Nondestructive Detection of Delamination in IC Packages Utilizing Open-Ended Coaxial Line Sensor

Quantum Diamond Microscope for Narrowband Magnetic Imaging with High Spatial and Spectral Resolution

A Miniature Resonant Magnetic Field Probe Integrated with MLCC

Microwave Imaging for the Integrity Assessment of IC Packages

Design of a Compact Integrated Diamond NV Center Quantum Probe

High-Dynamic-Range Detection of Microwave Signal on Chip Surface Based on Diamond Sensors

High-Resolution Short-Circuit Fault Localization in a Multi-Layer Integrated Circuit using a Quantum Diamond Microscope

A Simple High-resolution Near-field Probe for Microwave Non-Destructive Test and Imaging

A Miniature Multi-Component Probe for Near-Field Scanning

Imaging electromagnetic boundary of microdevice using a wide field quantum microscope