Abstract:Non-destructive tests working at lower microwave frequencies have large advantages of dielectric material penetrability, lower equipment cost, and lower implementation complexity. However, the resolution will become worse as the work frequencies become lower. Relying on designing the structure of high field confinement, this study realizes a simple complementary spiral resonators (CSRs)-based near-field probe for microwave non-destructive testing (NDT) and imaging around 390 MHz (λ = 769 mm) whereby very high resolution (λ/308, 2.5 mm) is achieved. By applying an ingenious structure where a short microstrip is connected to a microstrip ring to feed the CSR, the probe, that is a single-port microwave planar circuit, does not need any extra matching circuits, which has more application potential in sensor arraying compared with other microwave probes. The variation of the electric field distribution with the standoff distance (SOD) between the material under test and the probe are analyzed to reveal the operation mechanisms behind the improved sensitivity and resolution of the proposed probe. Besides, the detection abilities of the tiny defects in metal and non-metal materials are demonstrated by the related experiments. The smallest detectable crack and via in the non-metal materials and the metal materials are of a λ/1538 (0.5 mm) width, a λ/513 (1.5 mm) diameter, a λ/3846 (0.2 mm) width and a λ/513 (1.5 mm) diameter, respectively. Moreover, to further evaluate the performance of the proposed probe, the defects under skin layer in the multilayer composite materials and the defects under corrosion in the carbon steel are inspected and imaged. Due to lower work frequency, high resolution, outstanding detection abilities of tiny defects, and large potentials in sensor arraying, the proposed probe would be a good candidate for microwave NDT and imaging.

Quantum near field probe for integrated circuits electromagnetic interference at wafer level

Application of single photon counter module in weak signal detection for RF chip scanning using a quantum near field probe

Surface H‐field mapping of a microwave limiter chip based on quantum diamond probe

Micron-sized fiber diamond probe for quantum precision measurement of microwave magnetic field

Surface H‐field mapping of a GaAs single pole double throw switch chip based on quantum diamond probe

Experimental study on the characteristics of near‐field distribution of chips based on nano‐diamond quantum magnetometer

A Miniature Multi-Component Probe for Near-Field Scanning

Design of a Compact Integrated Diamond NV Center Quantum Probe

A fiber based diamond RF B-field sensor and characterization of a small helical antenna

A Miniature Resonant Magnetic Field Probe Integrated with MLCC

Non-Invasive Imaging Method of Microwave Near Field Based on Solid State Quantum Sensing

A Wideband and High Sensitivity Probe Design for Near-Field Scanning

Toward Characterizing 3-D Microwave Field With Microscale Resolution Using Nitrogen-Vacancy Centers in Diamond

Optimized microwave sensing in broad frequency range by a fiber diamond probe

Design of Miniature Active Magnetic Probe for Near-Field Weak Signal Measurement in ICs

Noninvasive Imaging Method of Microwave Near Field Based on Solid-State Quantum Sensing

A Simple High-resolution Near-field Probe for Microwave Non-Destructive Test and Imaging

A Miniature Electric Probe with a High Spatial Resolution

Scanning diamond NV center probes compatible with conventional AFM technology

A Nanosecond level current pulse capture taper optical fiber probe based on micron level NV color center diamond

Nanodiamonds based optical-fiber quantum probe for magnetic field and biological sensing