Numerical simulation of the polymer electrolyte membrane fuel cells with intermediate blocked interdigitated flow fields
Fatemeh Bagherighajari,Abbas Ramiar,Mohammadmahdi Abdollahzadehsangroudi,José Carlos Páscoa,Paulo J. Oliveira
DOI: https://doi.org/10.1002/er.8233
IF: 4.6
2022-06-12
International Journal of Energy Research
Abstract:Performance curves of a polymer electrolyte membrane fuel cell (PEMFC) with various type of interdigitated flow field at the cathode side. Summary The main purpose of this paper is to study fuel cell performance using an interdigitated flow field with intermediate channel blocks on the cathode side. Application of an intermediate block in the middle of the interdigitated flow channel is a very new idea aimed at increasing the performance of polymer membrane fuel cells, which in practice result in novel arrangements of interdigitated flow channels. A middle block is desirable because the change in flow channel is minimal, the cost of fabricating bipolar plates does not increase, and it leads to an increase in the transfer rate of reactants into the gas diffusion layer due to enhanced over‐rib flow pattern and direction. In this work, a three‐dimensional, isothermal, and two‐phase model is used to simulate the performance of such fuel cells. The polarization curves, the distribution of reactants on the cathode side, the distribution of liquid water, and the induced transverse flow were analyzed for three type of interdigitated flow fields along with parallel flow fields at reference conditions. The results showed that interdigitated flow fields with middle blocks lead to an increase in reactant transfer to the catalyst layer, an increase in reaction rate, and better removal of the resulting liquid water within the fuel cell. In the reference condition, in terms of maximum power density, the type I interdigitated flow field (without intermediate block) increased the net power by 8.2% compared to the parallel flow field, and the type II and III interdigitated flow fields also increased the power by 12.58% and 9.03%, respectively. At high current density, the type II interdigital flow field had the best performance in terms of enhancing the transfer of reactants to the catalyst layer and the expulsion of liquid water from that layer.
energy & fuels,nuclear science & technology