Abstract:The catastrophic effects of atmospheric greenhouse gases and the depletion of non-renewable resources has led to the urgency to develop clean, sustainable energy technologies to meet increasing energy demands. However, the intermittent nature of current renewable energy technologies warrants the acquisition of on-demand renewable energy through either energy production or storage methods. Polymer electrolyte membrane fuel cells (PEMFCs) are promising candidates for this task, as they utilize the most abundant element on Earth, hydrogen, to produce high amounts of power under rapid changes in load with little to no greenhouse gas emissions (1). Therefore, PEMFCs have great potential to help offset the negative impact of atmospheric pollution due to excessive carbon emissions. However, liquid water management issues associated with high power output of the fuel cell typically leads to reduced performance and durability of the fuel cell, and thereby hinders global implementation of these devices (2). To minimize these losses and improve GDL material designs, an understanding of the relationship between product liquid water distributions in the cathode GDL and transport properties of PEMFCs under varying operating conditions is highly valuable. Previous works have characterized the effect of operating temperature on liquid water pathways and distributions in GDLs by visualizing operando PEMFCs with 3D imaging techniques such as X-ray computed tomography (CT) (3). The high-speed, high-resolution capabilities of these imaging techniques enable the visualization of dynamic pore-scale activity to elucidate transport mechanisms in the GDL. In this work, the effect of inlet relative humidity on the formation and distribution of liquid water pathways in cathode GDLs is investigated by imaging a PEMFC operando with synchrotron X-ray CT at high spatial resolution, enabling the resolution of water in the individual pores of the GDL. The contribution of a microporous layer (MPL) is also explored by imaging a cell with an MPL and without. Imaging is conducted on a specialized cell designed to facilitate continuous rotation about the CT stage, enabling fast acquisition of consecutive scans to achieve high temporal resolution useful for visualizing the dynamic development of preferential water pathways. Additionally, electrochemical impedance spectroscopy was performed to quantify mass transport losses. The sequence of CT images was utilized to capture the dynamics of liquid water development as well as stabilized water distributions. Visualizing the reconstructed images shows that as current increases, water production increases, and the development of water pathways to breakthrough at the flow field interface is observed. Additionally, results show that an increase in relative humidity led to a significant increase in cathode GDL water saturation. The contribution of this study to understanding transport mechanisms in GDL materials is significant to the characterization and optimal design of materials for improved PEMFC performance. Ultimately, the goal of this work is to accelerate the worldwide adoption of PEMFCs as a sustainable, reliable solution to replace conventional carbon-emitting energy sources. 1. Alaswad et al. , J. Hydrog. Energy , 41 , (2016) 2. Nagai et al. , J. Power Sources , 435 , (2019) 3. D. Shum et al. , Electrochem. Acta , 256 , (2017)

Multi-sub-inlets at Cathode Flow-Field Plate for Current Density Homogenization and Enhancement of PEM Fuel Cells in Low Relative Humidity

Uncoupling Characteristics Of Temperature And Relative Humidity Distribution In A Commercial-Size Polymer Electrolyte Membrane Fuel Cell

Numerical Modeling of Liquid Water Transport Inside and Across Membrane in PEM Fuel Cells

Comparison of Self-Humidification Effect on Polymer Electrolyte Membrane Fuel Cell with Anodic and Cathodic Exhaust Gas Recirculation

Modeling and Experimental Investigation of the Anode Inlet Relative Humidity Effect on a PEM Fuel Cell

Numerical Study of Water Transport and Operating Strategy for Fuel Cells with Segmented Water Management Flow Fields

Performance of PEMFCs with Internal Humidification

Proton Exchange Membrane Fuel Cell with Humidifying Zone

Improvement of Thermal and Water Management of Air-Cooled Polymer Electrolyte Membrane Fuel Cells by Adding Porous Media into the Cathode Gas Channel

The Optimization of PEM Fuel Cell Performance Using the CFD Method Combined with Experimental Validation

Investigating the Influence of Inlet Relative Humidity on Polymer Electrolyte Membrane Fuel Cell Performance by Visualizing 4-D Water Distributions in Gas Diffusion Layers

Effects of Humidification Temperatures on Local Current Characteristics in a PEM Fuel Cell

Research for the Influence of Inlet Gas Humidification on PEMFC

Effect of cathode relative humidity on membrane water content and performance of PEMFC

Multiple in-situ measurement of water transport in the bipolar plate of proton exchange membrane fuel cell

Bio-inspired Design of an Auxiliary Fishbone-Shaped Cathode Flow Field Pattern for Polymer Electrolyte Membrane Fuel Cells

Multiple Effects of Non-Uniform Channel Width along the Cathode Flow Direction Based on a Single PEM Fuel Cell: an Experimental Investigation

Flow field configuration design for a large-scale hydrogen polymer electrolyte membrane fuel cell

Analyze the Effects of Flow Mode and Humidity on PEMFC Performance by Equivalent Membrane Conductivity

Numerical Investigation of Tapered Flow Field Configurations for Enhanced Polymer Electrolyte Membrane Fuel Cell Performance

Three-dimensional numerical study of a cathode gas diffusion layer with a through/in plane synergetic gradient porosity distribution for PEM fuel cells