Abstract:Lithium-rich layered oxides have attracted much attention due to their high discharge capacity (>250 mA h·g–1). However, lithium-rich layered cathodes suffer from poor rate capabilities and voltage decay, which seriously limit their practical application. Herein, a unique @spinel double-spinel shell heterostructure is designed and successfully synthesized via coprecipitation and high-temperature solid-phase methods. In particular, lithium-rich layered oxides show good rate capabilities and high capacity retention when the molar amount of cobalt acetate and manganese acetate is 5%. After 100 cycles at 0.2 C, a discharge capacity of 232 mA h g–1 and a capacity retention of 92.7% can be obtained. The superior electrochemical performance of the in situ-transformed Li-rich layered cathode can be attributed to the unique three-dimensional diffusion channels for Li ions of the surface spinel phase. Besides, the in situ-transformed LiCoMnO4 shell can also improve the structural stability of the Li-rich layered oxides by reducing the side reactions and protecting the material from being corroded by the electrolyte. This study provides a strategy for surface modification, which can effectively improve the electrochemical performance of Li-rich layered cathode materials with high performance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01955.SEM image of the precursor Ni1/6Co1/6Mn4/6CO3 and the corresponding mapping spectrum; ex situ XRD spectra of the LLO and LSS-0.05 samples; EDS line scan of the selected area and the corresponding HTEM diagram of the LSS-0.05 sample; CV and dQ/dV curves of the first three cycles of the LLO, LSS-0.05, and LSS-0.1 samples; initial charge and discharge curves of LiCoMnO4, LSS-0.2, and LSS-0.4 samples; discharge curves of LLO, LSS-0.05, and LSS-0.1 samples at different rates and with different cycles; typical single titration curve of GITT measurements; equivalent circuit of half-cells; and EIS spectra of LLO, LSS-0.05, and LSS-0.1 samples in the initial cycle (PDF)This article has not yet been cited by other publications.

In Situ Reconstruction of the Spinel Interface on a Li-Rich Layered Cathode Material with Enhanced Electrochemical Performances through HEPES and Heat Treatment Strategy

Improving the Electrochemical Performance of a Lithium-Rich Layered Cathode with an In Situ Transformed Layered@Spinel@Spinel Heterostructure

Engineering Hetero-Epitaxial Nanostructures with Aligned Li-ion Channels in Li-rich Layered Oxides for High-Performance Cathode Application

Stable Heteroepitaxial Interface of Li-rich Layered Oxide Cathodes with Enhanced Lithium Storage

Co-gradient Li-rich cathode relieving the capacity decay in Lithium-ion batteries

Facile synthesis and electrochemical performance of lithium-rich layered oxides with stable hierarchical structure through HEPES-assisted co-precipitation method

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content

Heterostructured lithium-rich layered oxides core@ spinel- MgAl2O4 shell as high-performance cathode for lithium-ion batteries

Fast Charge-Transport Interface on Primary Particles Boosts High-Rate Performance of Li-Rich Mn-Based Cathode Materials.

Self-compacting engineering to achieve high-performance lithium-rich layered oxides cathode materials

Boosting Rate Performance of Layered Lithium-rich Cathode Materials by Oxygen Vacancy Induced Surface Multicomponent Integration

Multifunctional Ho2o3 Coating with Oxygen Vacancies Enables High-Performance Lithium-Rich Layered Oxide Cathodes

An In Situ Near‐Surface Reconstruction Strategy Endowing Lithium‐Rich Oxides with Li/O Dual Vacancies and Spinel‐Carbon Dual Coating Layers Toward High Energy Density Cathode

An Li-rich oxide cathode material with mosaic spinel grain and a surface coating for high performance Li-ion batteries

In Situ Formed Heterostructure Interface and Well-Tuned Electronic Structure Ensuring Long Cycle Stability for 4.9 V High-Voltage Li-Rich Layered Oxide Cathodes

Interfacial-engineering-enabled High-Performance Li-rich Cathodes

Alternate heterogeneous superlattice control of lattice strain to stabilize Li-rich cathode

Highly stable surface and structural origin for lithium-rich layered oxide cathode materials

Surface Structural Transition Induced by Gradient Polyanion‐Doping in Li‐Rich Layered Oxides: Implications for Enhanced Electrochemical Performance

Single-crystal Li-rich Layered Cathodes with Suppressed Voltage Decay by Double-Layer Interface Engineering

An interfacial framework for breaking through the Li-ion transport barrier of Li-rich layered cathode materials