Abstract:Although the lithium-rich cathode material Li1.2Mn0.54Ni0.13Co0.13O2, as a promising cathode material, has a high specific capacity, it suffers from capacity decay and discharge voltage decay during cycling. In this work, the specific capacity and discharge voltage of Li1.2Mn0.54Ni0.13Co0.13O2 are stabilized by surface-functionalized LiCeO2 coating. We have conducted LiCeO2 coating via a mild synchronous lithium strategy to protect the electrode surface from electrolyte attack. This optimized LiCeO2 coating has high Li+ conductivity and abundant oxygen vacancies. The results demonstrate that 3% LiCeO2-coated Li1.2Mn0.54Ni0.13Co0.13O2 exhibits the highest capacity retention rate at 1, 2, and 5 C after 200 cycles, which were 84.3%, 85.4%, and 86.3%, respectively. The discharge specific capacity was almost 1.3, 1.4, and 1.4 times that of the pristine electrode. In addition, the 3% LiCeO2 electrode exhibited the least voltage decay of 0.409, 0.497, and 0.494 V at 1, 2, and 5 C, which was only about half of the pristine electrode. It should not be overlooked that the 3% LiCeO2 electrode still exhibits a high capacity at high current densities of 1250 mA g–1 (5 C) and 2500 mA g–1 (10 C), and its specific discharge capacities are 190.5 and 160.6 mAh g–1, respectively. These outstanding electrochemical properties benefit from surface-functionalized LiCeO2 coatings. To better understand the mechanism of oxygen loss of lithium-rich materials, we propose the lattice oxygen migration path of the LiCeO2-coated electrodes during the cycle. Our research provides a possible solution to the poor rate capability and cycle performance of cathode materials through surface-functionalized coatings.

Multifunctional Ho2o3 Coating with Oxygen Vacancies Enables High-Performance Lithium-Rich Layered Oxide Cathodes

Mitigation of Oxygen Evolution and Phase Transition of Li-Rich Mn-Based Layered Oxide Cathodes by Coating with Oxygen-Deficient Perovskite Compounds

Enhanced Cycling Stability of Lithium-Rich Cathode Materials Achieved by in-situ Formation of LiErO2 Coating

Li-rich layered oxide coated by nanoscale MoOx film with oxygen vacancies and lower oxidation state as a high-performance cathode material

Synchronous construction of oxygen vacancies with suitable concentrations and carbon coating on the surface of Li-rich layered oxide cathode materials by spray drying for Li-ion batteries

In Situ Induced Lattice‐Matched Interfacial Oxygen‐Passivation‐Layer Endowing Li‐Rich and Mn‐Based Cathodes with Ultralong Life

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Co-gradient Li-rich cathode relieving the capacity decay in Lithium-ion batteries

Building oxygen-rich vacancy coating for fast Li-ion diffusion kinetics and stable cycling of lithium-rich layered oxide cathode at wide-temperature

Heteroepitaxial oxygen-buffering interface enables a highly stable cobalt-free Li-rich layered oxide cathode

Boosting Rate Performance of Layered Lithium-rich Cathode Materials by Oxygen Vacancy Induced Surface Multicomponent Integration

In Situ Reconstruction of the Spinel Interface on a Li-Rich Layered Cathode Material with Enhanced Electrochemical Performances through HEPES and Heat Treatment Strategy

In Situ Surface Coating and Oxygen Vacancy Dual Strategy Endowing a Li-Rich Li 1.2 Mn 0.55 Ni 0.11 Co 0.14 O 2 Cathode with Superior Lithium Storage Performance

Enabling Long‐Term Cycling Stability Within Layered Li‐Rich Cathode Materials by O2/O3‐Type Biphasic Design Strategy

Stable Heteroepitaxial Interface of Li-rich Layered Oxide Cathodes with Enhanced Lithium Storage

Heterostructured lithium-rich layered oxides core@ spinel- MgAl2O4 shell as high-performance cathode for lithium-ion batteries

Stabilized Li-Rich Layered Oxide Cathode by a Spontaneously Formed Yb and Oxygen-Vacancy Rich Layer on the Surface

Improved Electrochemical Performances of Li- and Mn-Rich Layered Oxides 0.4li4/3mn2/3o2·0.6lini1/3co1/3mn1/3o2 Cathode Material by Co3O4 Coating

Improved High Rate Capability of Li[Li0.2Mn0.534Co0.133Ni0.133]O2 Cathode Material by Surface Modification with Co3O4

Surface-Functionalized Coating for Lithium-Rich Cathode Material To Achieve Ultra-High Rate and Excellent Cycle Performance

Improving the Cycling Stability of Li-Rich Mn-Based Cathodes Through Surface Modification of VOPO4