Abstract:Lithium-rich layered oxides have attracted much attention due to their high discharge capacity (>250 mA h·g–1). However, lithium-rich layered cathodes suffer from poor rate capabilities and voltage decay, which seriously limit their practical application. Herein, a unique @spinel double-spinel shell heterostructure is designed and successfully synthesized via coprecipitation and high-temperature solid-phase methods. In particular, lithium-rich layered oxides show good rate capabilities and high capacity retention when the molar amount of cobalt acetate and manganese acetate is 5%. After 100 cycles at 0.2 C, a discharge capacity of 232 mA h g–1 and a capacity retention of 92.7% can be obtained. The superior electrochemical performance of the in situ-transformed Li-rich layered cathode can be attributed to the unique three-dimensional diffusion channels for Li ions of the surface spinel phase. Besides, the in situ-transformed LiCoMnO4 shell can also improve the structural stability of the Li-rich layered oxides by reducing the side reactions and protecting the material from being corroded by the electrolyte. This study provides a strategy for surface modification, which can effectively improve the electrochemical performance of Li-rich layered cathode materials with high performance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01955.SEM image of the precursor Ni1/6Co1/6Mn4/6CO3 and the corresponding mapping spectrum; ex situ XRD spectra of the LLO and LSS-0.05 samples; EDS line scan of the selected area and the corresponding HTEM diagram of the LSS-0.05 sample; CV and dQ/dV curves of the first three cycles of the LLO, LSS-0.05, and LSS-0.1 samples; initial charge and discharge curves of LiCoMnO4, LSS-0.2, and LSS-0.4 samples; discharge curves of LLO, LSS-0.05, and LSS-0.1 samples at different rates and with different cycles; typical single titration curve of GITT measurements; equivalent circuit of half-cells; and EIS spectra of LLO, LSS-0.05, and LSS-0.1 samples in the initial cycle (PDF)This article has not yet been cited by other publications.

Heterostructured lithium-rich layered oxides core@ spinel- MgAl2O4 shell as high-performance cathode for lithium-ion batteries

Engineering Hetero-Epitaxial Nanostructures with Aligned Li-ion Channels in Li-rich Layered Oxides for High-Performance Cathode Application

Self-compacting engineering to achieve high-performance lithium-rich layered oxides cathode materials

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

An Li-rich oxide cathode material with mosaic spinel grain and a surface coating for high performance Li-ion batteries

Stable Heteroepitaxial Interface of Li-rich Layered Oxide Cathodes with Enhanced Lithium Storage

Multifunctional Surface Construction for Long-Term Cycling Stability of Li-Rich Mn-Based Layered Oxide Cathode for Li-Ion Batteries

High-Performance Li(Li0.18Ni0.15Co0.15Mn0.52)O2@Li4M5O12 Heterostructured Cathode Material Coated with a Lithium Borate Oxide Glass Layer

In Situ Reconstruction of the Spinel Interface on a Li-Rich Layered Cathode Material with Enhanced Electrochemical Performances through HEPES and Heat Treatment Strategy

Surface structure regulation toward anionic redox activation of Li1.20Mn0.533Ni0.133Co0.133O2 cathodes with high initial coulombic efficiency

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content

Constructing stable surface structures enabling fast charging for Li-rich layered oxide cathodes

In Situ Formed Heterostructure Interface and Well-Tuned Electronic Structure Ensuring Long Cycle Stability for 4.9 V High-Voltage Li-Rich Layered Oxide Cathodes

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a LixTM3-xO4-type spinel shell

Interfacial-engineering-enabled High-Performance Li-rich Cathodes

Improving the Electrochemical Performance of a Lithium-Rich Layered Cathode with an In Situ Transformed Layered@Spinel@Spinel Heterostructure

Li+-conductive Li2SiO3 stabilized Li-rich layered oxide with an in situ formed spinel nano-coating layer: toward enhanced electrochemical performance for lithium-ion batteries

Facile Morphology Modulation to Enhance Stability and Fast Kinetics of Anionic Redox for Li-Rich Layered Oxides Cathodes

Boosting cationic and anionic redox activity of Li-rich layered oxide cathodes via Li/Ni disordered regulation

Surface Heterostructure Induced by PrPO4 Modification in Li1.2[Mn0.54Ni0.13Co0.13]O2 Cathode Material for High-Performance Lithium-Ion Batteries with Mitigating Voltage Decay.

An In Situ Near‐Surface Reconstruction Strategy Endowing Lithium‐Rich Oxides with Li/O Dual Vacancies and Spinel‐Carbon Dual Coating Layers Toward High Energy Density Cathode