Abstract:Fillet welds by intermittent welding are widely used in the welding of centrifugal fans, such as attaching a fan blade to the rear plate. The intermittent welding method transforms the full-length continuous weld into multiple short welds to minimize distortion by reducing the total heat input for a welded joint to control welding distortion. An infinite number of short welds are created during this process. However, depending on the complexity of the model, the computational cost of predicting welding distortion based on full-scale modeling is considerable. These numerous short welds undoubtedly complicate modeling and computations, limiting rapid distortion prediction for large and complex structures. This study develops an equivalent deformation calculation approach based on a local-to-global technique and applies it to predict distortion of a fillet joint welded specimen. The approach consists of two steps. First, the welding-induced structural deformation is calculated for a two-dimensional (2D) weld and a 2D heat-affected zone (local calculation). Second, the 2D structural deformation is applied to the full-scale welded structure using a nearest-point spatial interpolation algorithm to acquire the three-dimensional (3D) equivalent deformation (global calculation). Note that the weld shape was considered in both local and global calculations. In addition, welding tests were performed, and the coordinates of the key points were measured. The geometric parameters of the welds used in the numerical simulations were obtained from experimental observations. Finally, the key point coordinates obtained by the proposed approach were compared with experimental measurements. Furthermore, the distribution of out-of-plane distortion caused by the new approach was compared with the simulation results of the thermo-elastic-plastic method performed on a full-scale welded structure. The proposed approach can be verified by both comparisons.

Effective FE simulation methods for fillet welding process by continuous distributed heat input and element combination

Modeling Heat Transfer During Friction Stir Welding Using a Meshless Particle Method

Nonlinear Transient Analysis of Butt Welding Based on Finite Element Method

Sensitivity Analysis of Some High Efficiency Computational Methods for Welding Process Numerical Simulation

Thermo-Fluid-Coupled Analysis of Double Fillet Welds on Tube Membrane Panels During Submerged Arc Welding

Numerical Simulation of Tube-Plate Welding Structure with T-Shaped Sections

Finite element simulation of welding process and real-time monitoring assessment

Efficient finite element approach for modelling of actual welded structures

An Implicit Fillet‐Weld Element Formulation for Mesh‐Insensitive Fatigue Evaluation of Complex Structures

Prediction of distortion in a thin-plate structure with intermittent fillet joints using a local-to-global approach

Comparison of Finite Element Methods in Fusion Welding Processes—A Review

FEM Modeling of Softened Base Metal in Narrow-Gap Joint by CMT+P MIX Welding Procedure

FE analysis of residual stress and welding deformation of a low-alloy UHS quenched steel fillet joint

Numerical Analysis of Multi-Field Coupled Phenomena in Friction Stir Welding and Applications

Energy-input-based finite-element process modeling of inertia welding

NUMERICAL ANALYSIS OF IN-PROCESS HEAT TRANSFER AND MATERIAL FLOW DURING DISSIMILAR FRICTION STIR WELDING PROCESS

Finite element simulation of temperature field for TIG butt welding of thin plate

Precision and Efficiency Sensitivity of Some Key Techniques in Thermo-mechanical Numerical Simulation of Welding Process

The Discuss of the Finite Element Simulation Method of the Combined Connection with Bolts and Welds

A high-efficiency welding simulation method based on welding temperature

An adaptive Bernstein-Bézier finite element method for heat transfer analysis in welding