Abstract:Low carbon steel plays an important role in many applications due to its high strength. Its high strength comes from the strengthening effect of nano-Cu-rich phase precipitates. In order to effectively adjust the microstructure of Cu-rich phase precipitates and obtain Fe-Cu-based steel with the best properties by adding different alloying elements (Mn, Al), it is necessary to understand the precipitation process of Cu particles. In this paper, based on the Ginzburg-Landau theory, the previous phase field model is modified, and the continuous phase field method is used to simulate the precipitation mechanism of nanometer Cu-rich precipitates and the inhibiting of the effect of Al content on Cu-rich precipitates of Fe-15%Cu-3%Mn- x Al ( x = 1%, 3%, 5% mass fraction) alloy at 873 K isothermal aging. Combining with the free energy derived from thermodynamics database, the microstructure evolution corresponds to the real alloy system. By calculating the composition field variables and structural order parameters, the evolution of phase separation and precipitated phase morphology in aging process are simulated. Moreover, the influence law of morphology, quantity density, average particle radius, growth and coarsening of Cu-rich precipitated phase are discussed. The results show that in the early stage of aging process, the nano-Cu-rich phase precipitates through the spinodal decomposition mechanism, and is randomly distributed in the iron matrix. Furthermore, due to the difference in atomic diffusion rate, the core-shell structure with Cu-rich phase as a core is formed. With the aging time extending, the structure of Cu-rich phase precipitates changes from bcc to fcc. Because of the synergistic effect between Al and Cu, the diffusion of Cu is slowed down. Besides, with the Al and Mn atoms precipitating, Al/Mn clusters are segregated around the Cu-rich precipitates, forming the Al/Mn intermetallic core-shell structure, and gradually wrapping the Cu-rich phase uniformly. During the evolution of the precipitation stage, the Al/Mn clusters are isolated around the Cu-rich precipitation phase, forming a gradually uniform Al/Mn intermetallic phase core shell structure covering the Cu-rich phase, which is to hinder the buffer layer from forming in the precipitation stage of the reservoir. In addition, with the Al content increasing, the Al/Mn intermetallic phase promotes the growth of the buffer layer and hinders the Cu-rich precipitate phase from growing and coarsening.

Effects of Ni and Mn contents on precipitation and strengthening behavior in Cu-Ni-Mn ternary alloys

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Microstructure evolution and aging hardening in a Cu-25Ni-25Mn alloy

Co-precipitated Ni/Mn Shell Coated Nano Cu-rich Core Structure: A Phase-Field Study

Effect of Cu on Nanoscale Precipitation Evolution and Mechanical Properties of a Fe-NiAl Alloy.

Differential effects of Fe, Ti and Fe + Ti addition on the discontinuous precipitation and properties of cu-Ni-Sn alloys

Influence of Mn Addition on the Evolution of Precipitates in Al-Cu Alloys

Effects of co-addition of Ni and Al on precipitation evolution and mechanical properties of Fe-Cu alloy

Effect of Cu and Mn content on solidification microstructure, T-phase formation and mechanical property of Al Cu Mn alloys

Phase field study of effect of Al on Cu-rich precipitates in Fe-Cu-Mn-Al alloys

The Effect of Mn/Ni on Thermodynamic Properties of Critical Nucleus in Fe-Cu-Mn (ni) Ternary Alloys

Effects of Ni Content and Heat Treatment on the Properties, Microstructures, and Precipitates of Cu-0.2 wt% Be-x wt% Ni Alloys

Investigation of Cu-enriched precipitates in thermally aged Fe-Cu and Fe-Cu-Ni model alloys

Microstructure and Precipitation of a Cu–Ni Alloyed Medium‐Mn Duplex Low‐Density Steel Prepared by Near‐Rapid Solidification

Study of the influence of alloying elements on Cu precipitation in steel by non-classical nucleation theory

Enhanced mechanical properties and strengthening mechanism of Cu-Ni-Si alloy with trace chromium addition

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

Precipitation behaviors and property variations of directionally solidified Cu-15Ni-8Sn alloy

Precipitation Behaviors and Properties of Solution-Aging Al-Zn-Mg-Cu Alloy Refined with TiN Nanoparticles

Phase-field modeling of microstructure evolution of Cu-rich phase in Fe–Cu–Mn–Ni–Al quinary system coupled with thermodynamic databases

Effects of Ni content on microstructure and properties of aged Cu−0.4Be alloy