Abstract:Effects of temperature, strain, strain rate and cooling rate on austenite grain size were investigated at first. The results show that by increasing the strain from 0.0 to 0.5 can significantly refine austenite grains for different deformation temperatures studied. However, by increasing the strain from 0.5 to 0.8 can not continue to refine austenite grains for higher deformation temperatures of 1 100 and 1150 degrees C, while austenite grains can be further refined for lower deformation temperature of 1 000 degrees C. The austenite grain size is proportional to (epsilon) over dot(-rho) ((epsilon) over dot is strain rate and rho is the strain rate exponent) and v(-q) (v is cooling rate and q is cooling rate exponent). Moreover, using ultra fast cooling after hot rolling can significantly refine austenite grains. Then a low-carbon bainite steel with yield strength of 811 MPa and ductile-brittle transition temperature (DBTT) of -49 degrees C produced by optimum recrystallization controlled rolling designed based on thermosimulation results and ultra fast cooling. The microstructural characteristics, mechanical properties and the mechanism of toughening were investigated in details. On the one hand, fine austenite grains with equivalent diameter of 16.5 mu m is obtained by recrystallization repeated and suppressing recrystallized austenite grain growth using ultra fast cooling. On the other hand, recrystallized austenite grains are divided by fine bainite blocks with higher misorientation between each other. So the fine bainite microstructure is obtained. In addition, Prior austenite grain boundaries and bainite packet and block boundaries with higher misorientation can effectively arrest cracks propagation, resulting in better low-temperature toughness.

Effect of crystallographic features on low-temperature fatigue ductile-to-brittle transition for simulated coarse-grained heat-affected zone of bainite steel weld

The fatigue properties, microstructural evolution and crack behaviors of low-carbon carbide-free bainitic steel during low-cycle fatigue

Three-dimensional morphology and crystallographic characteristics of the low-temperature bainitic microstructure in high-carbon steel

Quasi in-situ observations of microstructure evolution during low cycle fatigue in carbide-free bainitic steel

Revealing the mechanism of crack initiation and propagation in CGHAZ of S690QL welded joints through low-temperature impact tests with gradient setting of pendulum angle

Effect of zirconium addition on the austenite grain coarsening behavior and mechanical properties of 900 MPa low carbon bainite steel

Effect of the Cooling Rate of Thermal Simulation on the Microstructure and Mechanical Properties of Low-Carbon Bainite Steel by Laser-Arc Hybrid Welding

Effect of refined multi-scale microstructures on the ultra-high impact toughness of bainitic steel austempered below Ms temperature

Microstructure and Toughness of the CGHAZ of an Offshore Platform Steel

Effect of the cooling rate in the medium temperature zone on the phase transformation and microstructure of carbide-free bainitic steel

Effect of Microstructure on Low-Temperature Fracture Toughness of a Submerged-Arc-Welded Low-Carbon and Low-Alloy Steel Plate

Effect of phase transformation sequence on the low cycle fatigue properties of bainitic/martensitic multiphase steels

Crystallography of Transformation Products with Different Cooling Rates in Low-Carbon Alloy Steel and Its Effect on Low-Temperature Toughness Uniformity of Heavy Plates

Low-Carbon Bainite Steel with High Strength and Toughness Processed by Recrystallization Controlled Rolling and Ultra Fast Cooling (RCR+UFC)

Effect of Bainite Microstructure Types on Mechanical Properties of Low-carbon Si-Mn Steel

Influence of Element Segregation at Grain Boundary of Heat Affected Zone on Low-cycle Fatigue Property of Weldment

Microstructural evolution and ultra-high impact toughness of austempered lamellar bainitic steel far below Ms temperature

Enhanced stretch flangeability and crack propagation behavior of an 1100 MPa grade TRIP-aided bainitic ferrite steel

Significant influence of heat input on microstructure evolution and mechanical properties of the simulated CGHAZ in a 1000 MPa grade ultra-high strength steel

The effect of microstructure evolution on the ratchetting-fatigue interaction of carbide-free bainite rail steels under different heat-treatment conditions

Crystallographic Study of Transformation Products of Heat-Affected Zone and Correlation with Properties of FH690 Heavy-Gauge Marine Steel by Multi-pass Submerged Arc Welding