Abstract:Plastics for various applications is increasing every year due to outstanding advantages, but after use recycling and disposal have remained a challenge. In this paper, through experiments, we compare properties of pyrolysis oil derived from after use HDPE (High-density polyethylene), LDPE (Low-density polyethylene), PP (Polypropylene)and styrene for their suitability as diesel engine fuel. This experimental study is to identify which type of plastic is suitable for blending with diesel. The physicochemical properties of pyrolysis oil of HDPE, LDPE, PP, and styrene were tested, tabulated and compared with diesel. The physicochemical properties of polypropylene pyrolysis oil (PPO) were found to be superior to the produced pyrolysis oil of HDPE, LDPE, and styrene. The GC-MS(Gas chromatography-mass spectrometry)and FT-IR (Fourier transform-infrared spectroscopy) were taken for pyrolysis oil of HDPE, LDPE, PP, and styrene and compared with diesel. PPO showed lower carbon number chain compounds compared to the other three waste plastics. We selected PPO for diesel engine performance and emission trials based on the results of the above tests. PPO was blended in the ratios of 5%, 10% and 15% with diesel. Combustion analysis showed a increase in cylinder pressure in comparison to diesel values. The heat release rates (HRR) were sharply higher than diesel. Both cylinder pressure and HRRvalues for PPO increased as the blend ratios increased. The emission results showed an increase in carbon monoxide (CO), hydrocarbon (HC)and oxides of Nitrogen (NOx)emissions. The multiple times increase in emissions is due to the presence of unsaturated hydrocarbons and higher carbon number of saturated compounds in PPO. GC-MS tests confirmed the presence of such compounds in PPO. To reduce the unsaturation to negligible levels, we will take up future experiments in hydrogenating PPO with various catalysts and test the performance and emissions in diesel engines.

Characterization of biodiesel based on plastic pyrolysis oil (PPO) and coconut oil: Performance and emission analysis using RSM-ANN approach

Performance and emission characteristics of novel biodiesel-diesel blends: an RSM and ANN approach

Performance, Combustion, and Emission analysis of diesel engine fuelled with pyrolysis oil blends and n-propyl alcohol-RSM optimization and ML modelling

Optimization of biodiesel production parameters for hybrid oil using RSM and ANN technique and its effect on engine performance, combustion, and emission characteristics

Optimization of diesel engine performance and emission using waste plastic pyrolytic oil by ANN and its thermo-economic assessment

Optimization of biodiesel production, engine exhaust emissions, and vibration diagnosis using a combined approach of definitive screening design (DSD) and artificial neural network (ANN)

Response Surface Methodology and Artificial Neural Networks-Based Yield Optimization of Biodiesel Sourced from Mixture of Palm and Cotton Seed Oil

Optimization of biodiesel yield from waste cooking oil and sesame oil using RSM and ANN techniques

Artificial neural network based forecasting of diesel engine performance and emissions utilizing waste cooking biodiesel

Exploring the performance and emission characteristics of a dual fuel CI engine using microalgae biodiesel and diesel blend: a machine learning approach using ANN and response surface methodology

Internal combustion engine fuel synthesis, suitability, physical property evaluation using mixing models and backpropagation ANN algorithm

Synthesis of biodiesel from the composite oil and process parameters optimization using artificial neural network

Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN)

Towards sustainable transportation and integrating ANN, RSM, and exergy analysis for biofuel-diesel blend optimisation of biodiesel ignition enhancer blends

Optimisation of an experimental and feasibility research on a CRDI diesel engine based on a blend of waste cooking oil and waste plastic oil using RSM: A value addition for disposed waste oil

Strategic combination of waste plastic/tire pyrolysis oil with biodiesel for natural gas-enriched HCCI engine: Experimental analysis and machine learning model

An ANN based modelling, forecasting, and experimental study of emissions and performance parameters running on microalgae biodiesel-nanoparticles blended fuel

Multi-objective optimization of ternary blends of Algal biodiesel-diesel-1-decanol to mitigate environmental pollution in powering a diesel engine using RSM, ANOVA, and artificial bee colony

Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM

Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel