Abstract:The major emission sources of NOX are from automobiles, trucks, and various non-road vehicles, power plants, coal fired boilers, cement kilns, turbines, etc. Plasma reactor technology is widely used in gas conversion applications, such as NOx conversion into useful chemical by-product. Among the plasma treatment techniques, nonthermal plasma (NTP) is widely used because it does not cause any damage to the surfaces of the reacting chamber. In this proposed work, the feasibility of Dielectric Barrier Discharge (DBD) reactor-based nonthermal plasma (NTP) process is examined based on four operating parameters including NOx concentration (300-400 ppm), gas flow rate (2-6 lpm), applied plasma voltage (20-30 kVpp), and electrode gap (3-5 mm) for removing NOx gas from diesel engine exhaust. Optimization of NTP process parameters has been carried out using response surface-based Box-Behnken design (BBD) method and artificial neural network (ANN) method and compared with the performance measures such as R2, MSE (mean square error), RMSE (root mean square error), and MAPE (mean absolute percentage error). Two kinds of analysis were carried out based on (1) NOx removal efficiency and (2) energy efficiency. Based on the simulation studies carried out for Nox removal efficiency, the RSM methodology produces the performance measures, 0.98 for R2, 1.274 for MSE, 1.128 for RMSE, and 2.053 for MAPE, and for ANN analysis method, 0.99 for R2, 2.167 for MSE, 1.472 for RMSE, and 1.276 for MAPE. These results shows that ANN method is having enhanced performance measures. For the second case, based on the energy efficiency study, the R2, MSE, RMSE, and MAPE values from the RSM model are 0.97, 2.230, 1.493, and 2.903 respectively. Similarly based on ANN model, the R2, MSE, RMSE, and MAPE values are 0.99, 0.246, 0.46, and 0.615, respectively. From the performance measures, it is found that the ANN model is accurate than the RSM model in predicting the NOx removal/reduction and efficiency. These models demonstrate that they have strong agreement with the experimental results. The experimental results are indicated that optimum conditions arrived based on the RSM model resulted in a maximum NOx reduction of 60.5% and an energy efficiency of 66.24 g/J. The comparison between the two models confirmed the findings, whereas this ANN model displayed a stronger correlation to the experimental evidence.

Towards sustainable transportation and integrating ANN, RSM, and exergy analysis for biofuel-diesel blend optimisation of biodiesel ignition enhancer blends

Exploring the performance and emission characteristics of a dual fuel CI engine using microalgae biodiesel and diesel blend: a machine learning approach using ANN and response surface methodology

Performance and emission characteristics of novel biodiesel-diesel blends: an RSM and ANN approach

Optimization of biodiesel production parameters for hybrid oil using RSM and ANN technique and its effect on engine performance, combustion, and emission characteristics

Development of an ammonia-biodiesel dual fuel combustion engine's injection strategy map using response surface optimization and artificial neural network prediction

Optimization of biodiesel production, engine exhaust emissions, and vibration diagnosis using a combined approach of definitive screening design (DSD) and artificial neural network (ANN)

Internal combustion engine fuel synthesis, suitability, physical property evaluation using mixing models and backpropagation ANN algorithm

Optimization of biodiesel yield from waste cooking oil and sesame oil using RSM and ANN techniques

Estimation of efficiency, emission and exergy of a compression ignition engine under biohol-hydrogen strategies using artificial neural network

Modelling of compression ignition engine by soft computing techniques (ANFIS-NSGA-II and RSM) to enhance the performance characteristics for leachate blends with nano-additives

Comparative Study of Soft Computing and Metaheuristic Models in Developing Reduced Exhaust Emission Characteristics for Diesel Engine Fueled with Various Blends of Biodiesel and Metallic Nanoadditive Mixtures: An ANFIS-GA-HSA Approach

Artificial intelligence based-prediction of energy efficiency and tailpipe emissions of soybean methyl ester fuelled CI engine under variable compression ratios

An ANN based modelling, forecasting, and experimental study of emissions and performance parameters running on microalgae biodiesel-nanoparticles blended fuel

Multi-objective optimization of ternary blends of Algal biodiesel-diesel-1-decanol to mitigate environmental pollution in powering a diesel engine using RSM, ANOVA, and artificial bee colony

A Genetic Algorithm Optimized ANN for Prediction of Exergy and Energy Analysis Parameters of a Diesel Engine Different Fueled Blends

An Artificial Neural Network Model to Predict Efficiency and Emissions of a Gasoline Engine

Experimental analysis and parameter optimization on the reduction of NOx from diesel engine using RSM and ANN Model

Characterization of biodiesel based on plastic pyrolysis oil (PPO) and coconut oil: Performance and emission analysis using RSM-ANN approach

Prediction and optimization of emission in an agricultural harvest engine with biodiesel-diesel blends by a method of ANN and CMA-ES

Process parameter optimization of biodiesel production from algal oil by response surface methodology and artificial neural networks

Predictive modeling of specific fuel consumption in compression ignition engines using neural networks: A comparative analysis across diesel and polymer-based fuels