Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Population, industrialization, and urbanization made to exploit high volume of fossil fuels such as diesel to meet energy demands. Excess application of fossil fuels created environmental and health threats, hike in oil prices, and depletion of resources. Biodiesel was termed as a predominant alternative renewable fuel for diesel engines. In this research, a novel fuel is produced from the mixed feedstocks such as castor oil, mahua oil, and processed dairy waste by mixing in equal volumes (each 33.33% v/v). An esterification reaction was performed initially, since the acid value of raw oil is found to be 4.11 mg KOH/g oil. Three different acid catalyst concentrations (1, 2, and 3% v/v) were used to ascertain the effect of acid catalyst concentration on the acid value of oil. The acid value of esterified oil from the esterification reaction tends to decrease with an increase in acid concentration. Transesterification reaction parameters such as catalyst utilization (wt%), reaction temperature (°C), and oil to methanol ratio (molar) were varied in three levels (27 transesterification experiments) based on the Taguchi method to find the optimal reaction parameters for maximum biodiesel yield, high fuel flash point, and low fuel viscosity. At the end of each transesterification reaction, biodiesel yield percentage, and its properties such as fuel flash point and viscosity were measured as per the ASTM standard (D6751). Based on the multi-criteria decision-making-GRA method, the optimal value for maximum biodiesel yield and fuel properties such as flash point and viscosity was determined as catalyst utilization (3 wt%), reaction temperature (55 °C), and a molar oil to methanol ratio of 12. In addition, an earthen lamp test was conducted and measured properties of fuel were delineated to reveal that the produced biodiesel from the mixed non-edible oil is an effective feedstock for biodiesel production.

Synthesis of biodiesel from the composite oil and process parameters optimization using artificial neural network

Optimization of biodiesel production parameters for hybrid oil using RSM and ANN technique and its effect on engine performance, combustion, and emission characteristics

Artificial Neural Network and Response Surface Methodology for Predicting and Maximizing Biodiesel Production from Waste Oil with KI/CaO/Al2O3 Catalyst in a Fixed Bed Reactor

Response Surface Methodology and Artificial Neural Networks-Based Yield Optimization of Biodiesel Sourced from Mixture of Palm and Cotton Seed Oil

Optimization of biodiesel yield from waste cooking oil and sesame oil using RSM and ANN techniques

Internal combustion engine fuel synthesis, suitability, physical property evaluation using mixing models and backpropagation ANN algorithm

Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

Optimized biodiesel production from mixed non-edible oils using advanced computational techniques and a novel bifunctional liquified catalyst: Compatibility assessment in IC engines

Performance and emission characteristics of novel biodiesel-diesel blends: an RSM and ANN approach

Optimization, production, and environmental sustainability of clean energy fuel utilizing reused cooking oil employing CaO catalysts

Optimization of biodiesel production, engine exhaust emissions, and vibration diagnosis using a combined approach of definitive screening design (DSD) and artificial neural network (ANN)

Optimization of Cerbera manghas Biodiesel Production Using Artificial Neural Networks Integrated with Ant Colony Optimization

Performance evaluation of artificial neural network coupled with generic algorithm and response surface methodology in modeling and optimization of biodiesel production process parameters from shea tree (Vitellaria paradoxa) nut butter

Optimization and synthesis process of biodiesel production from coconut oil using central composite rotatable design of response surface methodology

Simultaneously maximizing microalgal biomass and lipid productivities by machine learning driven modeling, global sensitivity analysis and multi-objective optimization for sustainable biodiesel production

Characterization of biodiesel based on plastic pyrolysis oil (PPO) and coconut oil: Performance and emission analysis using RSM-ANN approach

Application of artificial neural networks for enhancing Aspergillus flavipes lipase synthesis for green biodiesel production

A novel strategy for efficient biodiesel production: Optimization, prediction, and mechanism

Process parameter optimization of biodiesel production from algal oil by response surface methodology and artificial neural networks

Artificial neural network based forecasting of diesel engine performance and emissions utilizing waste cooking biodiesel

Process Optimization of Biodiesel from Used Cooking Oil in a Microwave Reactor: A Case of Machine Learning and Box–Behnken Design