Abstract:The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination ( R 2 ) of 0.9943, adjusted R 2 of 0.9838, predicted R 2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Optimization and synthesis process of biodiesel production from coconut oil using central composite rotatable design of response surface methodology

Optimization of biodiesel production process for mixed nonedible oil (processed dairy waste, mahua oil, and castor oil) using response surface methodology

Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

Comprehensive Optimisation of Biodiesel Production Conditions via Supercritical Methanolysis of Waste Cooking Oil

Synthesis of Biodiesel via Interesterification Reaction of Calophyllum inophyllum Seed Oil and Ethyl Acetate over Lipase Catalyst: Experimental and Surface Response Methodology Analysis

Optimization of biodiesel production from palm oil under supercritical ethanol conditions using hexane as co-solvent: A response surface methodology approach

Production and Optimization of Biodiesel in a Membrane Reactor, Using a Solid Base Catalyst

Effectiveness of RSM based Central Composite Design for optimization of in-situ biodiesel production process from castor seeds

Parameters Optimization of Palm Oil Biodiesel Production at Various CaO Concentrations Using Response Surface Methodology

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Continuous production of biodiesel from waste cooking oil in a reactive distillation column catalyzed by solid heteropolyacid: optimization using response surface methodology (RSM)

Optimized biodiesel production from mixed non-edible oils using advanced computational techniques and a novel bifunctional liquified catalyst: Compatibility assessment in IC engines

Analysis of a novel high-speed homogenizer technique for methyl ester production using waste cooking oil: multi-objective optimization and energy analysis

Characterization of homogenous acid catalyzed biodiesel production from palm oil: experimental investigation and numerical simulation

Response Surface Optimization of Biocatalytic Biodiesel Production with Acid Oil

Application of Response Surface Methodology (RSM) in the statistical evaluation of biodiesel production from the neutral lipids of the Coelastrella-Nannochloropsis consortium

Lipase-mediated methanolysis of soybean oils for biodiesel production

Optimization of biodiesel production parameters for hybrid oil using RSM and ANN technique and its effect on engine performance, combustion, and emission characteristics

Coconut coir utilization as a catalyst precursor in the transesterification process of used cooking oil into cocodiesel

Response surface optimization of a single-step castor oil-based biodiesel production process using a stator-rotor hydrodynamic cavitation reactor

Optimization of process variables on two-step microwave-assisted transesterification of waste cooking oil