Abstract:The external ambient temperature plays a crucial role in influencing the hydration process of cemented paste backfill (CPB), causing notable variations in overall structure and physicalmechanical properties. To precisely analyze mechanical properties under different curing temperatures, a uniaxial compression strength (UCS) experiment was conducted. A real-time data acquisition system was established to monitor temperature, volumetric water content, and resistivity. Hydration heat measurement and low-field nuclear magnetic resonance (NMR) experiments were performed to analyze the hydration mechanism and the correlation between mechanical properties and thermal effects during the consolidation period. The study revealed that the relationship between UCS, elastic modulus, and curing temperature can be quantitatively characterized using polynomial functions. The mechanical parameters reach their peak values at a curing temperature of 40 degree celsius. However, exceeding 40 C leads to excessively rapid hydration rates, causing a decrease in hydration degree, and extremely high hydration rates result in reduced microstructure compactness. Under different curing temperature conditions, CPB exhibits substantial temperature effects in terms of volumetric water content, electrical resistivity, hydration heat, and NMR data, effectively characterizing the hydration mechanism. The hydration reaction unfolds through stages: initial induction, accelerated development, decelerated development, stable development, and hardening formation. As the curing temperature rises, the completion times of each stage exhibit a significant exponentially decreasing trend. Moreover, the application of the GA-BP neural network algorithm has unveiled inherent patterns between the monitoring results of CPB's hydration process and its macroscopic strength. Computed results show that the relative errors in predicting strength at various curing temperatures are all less than 0.1 %.

Effects of Water-cement Ratio and Hydration Heat Regulating Materials on Hydration Process of Early-age Cementitious Materials

Hydration of Early‐Age Composite Cement Paste Using Low‐Field Nuclear Magnetic Resonance

Low-Field Nuclear Magnetic Resonance Investigation on Early Hydration Characterization of Cement Paste Mixed with Mineral Admixtures

The Early-Age Drying Shrinkage of Cement-Based Materials with the Same Workability after Temperature Compensation

Insights into the effect of CNTs on cement hydration from the perspective of water evolution

Hydration Mechanism and Mechanical-Thermal Correlation of Cemented Paste Backfill under Different Curing Temperatures

Study on the Hydration and Moisture Transport of White Cement Containing Nanomaterials by Using Low Field Nuclear Magnetic Resonance

An Assessment Method of Hydration Degree of Rice Husk Ash Blended Cement Considering Temperature Effect

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Quantifying early age hydration and micro-structure evolution of fast setting binder using 1 H NMR

Effect of C-S-H Nucleating Agent on Cement Hydration

Effects of nano-C-S-H seed crystal on early-age hydration process of Portland cement

Effects of chloride content on early hydration performance of cement pastes

Exploring the Influence Factors of Early Hydration of Ultrafine Cement

Hydration Investigation of Negative Temperature Concrete at Early Age Based on Low-Field Nuclear Magnetic Resonance

Experimental analysis on the relationship between pore structure and capillary water absorption characteristics of cement‐based materials

Effect of n-C-S-H on Hydration and Reinforcement of Mineral Powder-Cement System at Low Temperatures

1H NMR Spin-Lattice Relaxometry of Cement Pastes with Polycarboxylate Superplasticizers

Hydration of Ultrafine and Ordinary Portland Cement at Early Ages

Monitoring of Hydration Using the Electrical Resistance of Carbon Fiber Reinforced Cement Materials

Isothermal Calorimetry Tests and Modeling of Cement Hydration Parameters