Abstract:Fabrication of the composite polymer electrolyte films via solution casting approach. A detailed account of the poly(vinylidene difluoride‐co‐hexafluoropropylene) (PVDF‐HFP)/succinonitrile (SN)/lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) based solid polymer electrolytes (SPEs) of various compositions is reported. SN is incorporated as plasticizer, while LiTFSI is employed as the source of lithium ions. Fourier transfer infrared (FTIR) spectroscopy reveals the formation of polar and electroactive γ crystal phase by PVDF in pristine PVDF‐HFP and the prepared SPE films. FTIR further confirms the interaction between the host polymer and the salt and between the salt and the plasticizer. The interaction between the salt and plasticizer suggests that SN not only offers the plasticization effect but also facilitates salt dissociation. The ion conductivity increases with increasing salt content up to 20 wt% but beyond that concentration a decline in ion conductivity is observed, which could be attributed to the ion pair association or cluster formation due to the excess salt concentration that reduces the availability of free ions and ultimately leads to the reduction in ion conductivity. After including SN in the SPE formulation, electrochemical impedance spectroscopy reveals a substantial increase in room temperature ion conductivity of the SPE from ~1.08 × 10−5 S cm−1 for pristine SPE with 20 wt% salt to ~2.7 × 10−4 S cm−1 for plasticized SPE with 40 wt% SN and 20 wt% salt. This is attributed to the plasticizing effect of SN that enhances ion mobility through the matrix and to the increased charge carrier concentration (SN facilities salt dissociation). The fabricated SPEs exhibit a significant enhancement in ion conductivity with increasing temperature and the maximum ion conductivity of 1.1 × 10−3 S cm−1 is attained at 393 K by plasticized SPE with 40 wt% SN content. The ion conductivity of all the prepared SPEs follows the temperature dependent Arrhenius behavior, suggesting the thermally activated ion hopping mechanism of ionic conduction. Further, the plasticized SPEs display near unity ion transference number indicating the predominance of the ionic mode of conduction. The dielectric and electric modulus analysis reveal a faster relaxation phenomenon and hence higher ion conductivity of the prepared SPEs with increasing salt and plasticizer content.

Electrical and optical properties of poly(acrylamide-co-acrylic acid) based polymer electrolytes containing water-soluble potassium iodide salt

Electrical and Structural Characterization of PVA/PEG Polymer Blend Electrolyte Films Doped with NaClO 4

Electrical and Structural Properties of Poly (Methyl Methacrylate) Doped Potassium Iodide (KI) Solid Polymer Electrolyte

Fourier transform infrared studies of gel polymer electrolyte based on poly(acrylamide-co-acrylic acid) – Ethylene carbonate incorporated with water-soluble sodium sulfide

Synthesis and Characterization of Novel Semi‐interpenetrating Polymer Network Electrolyte Based on Crosslinked P(GMA‐co‐AN)/PEO

Preparation and Ionic Conductivity of Solid Polymer Electrolyte Based on Polyacrylonitrile‐polyethylene Oxide

Enhanced structural, electrical, and electrochemical performance of polyethylene oxides (PEO)‐based polymer electrolytes for solid state K+ ion batteries

Optimized nano-perovskite lanthanum cuprate decorated PVA based solid polymer electrolyte

Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt

Study on ionic conductivity, dielectric and electrochemical properties of solid polymer electrolyte for battery applications

PAN–PEO Solid Polymer Electrolytes with High Ionic Conductivity

Effects of 1-hexyl-1-methylimidazolium iodide ionic liquid to poly(vinyl alcohol)–based solid polymer electrolyte

Effect of succinonitrile on the structural, ion conductivity, and dielectric properties of PVDF‐HFP based solid polymer electrolytes

Structural, Morphological, Electrical and Electrochemical Properties of PVA: CS-Based Proton-Conducting Polymer Blend Electrolytes

PEO/PVA/LiOH Solid Polymer Electrolyte Prepared via Ultrasound-assisted Solution Cast Method

Structure, thermal and electrical properties of PVDF-HFP/LiBOB solid polymer electrolyte

Studies of Circuit Design, Structural, Relaxation and Potential Stability of Polymer Blend Electrolyte Membranes Based on PVA:MC Impregnated with NH4I Salt

High Conductivity in a Fluorine-Free K-Ion Polymer Electrolyte

Chitosan-PEG-NaI based bio-polymer electrolytes: structural, thermal and ion dynamics studies

Design of Single Ionic Conduction in Polymeric Solid Electrolytes

Studies on structural, dielectric and charge transport properties of PVA:LiBr solid polymer electrolyte films