Influence of coating material on elastohydrodynamic lubrication between gear meshing interfaces based on direct coupling solution
Jiajia Zhang,Mengyao Dong,Yumei Hu,Huan Zhang,Wenjun Luo
DOI: https://doi.org/10.1007/s42114-022-00441-2
IF: 11.806
2022-05-04
Advanced Composites and Hybrid Materials
Abstract:Mechanical strength, wear resistance, and corrosion resistance of surface coatings or surface-modified composites and their effects on the contact mechanics, tribology, and thermodynamics characteristics of elastohydrodynamic lubrication (EHL) in gears, bearings, and cams have been a subject of interest in the material and tribology science over the last few decades. On the basis of direct coupling method presented in this paper, the influence of coating materials on the characteristic parameters of EHL between gear meshing interfaces was investigated. Gear meshing interfaces were simplified to the contact between a cylinder and a plate. A local fluid–structure interaction (FSI) model enclosing the contact areas of the cylinder, plate, and the lubricant between them was established and solved with software ADINA. The hydrodynamic behavior of lubricant was calculated utilizing the Navier–Stokes (N-S) equations, and the viscosity and density variation, non-Newtonian fluid, and cavitation effect of lubricant were implemented through secondary development programs. The presented direct-coupled solution approach was verified by ball-on-disc experiments. EHL characteristic parameters of gear meshing interfaces under different coating’s Young’s moduli and thicknesses were studied, and results show that the TiN_E305 coating with larger Young’s modulus will contribute to the formation of secondary pressure peak, larger maximum film pressures both in the central contact area and secondary pressure peak region, and smaller contact half width. The opposite results were observed when the DLC_E70 coating with smaller Young’s modulus is used. All these effects increase with the increasing of coating thickness.Graphical abstractElastohydrodynamic lubrication (EHL) characteristic parameters of gear meshing interfaces under three different coating materials were discussed and showed.
nanoscience & nanotechnology,materials science, composites