Abstract:Abstract The kinematic-geometric lubrication theory, which combines the results from the elastohydrodynamic lubrication theory and the meshing theory for gearing, is put forward for a line-conjugate gear drive to investigate its global intrinsic lubricating characteristics to guide its geometric design. The investigation concerning the global lubricating characteristics of the gear drive can be well utilized to seek the lubricating weak zone in the whole meshing zone and to determine the reasonable operating parameters for it. The relationship between the lubricating angle and sliding angle is made clear, and the lubricating angle is recommended to determine the lubricating weak point. The kinematic-geometric coefficient of oil film thickness is proposed to evaluate preliminarily the lubricating characteristics of the gear drive. This theory is applied to the arc-toothed cylindrical worm drive, and it is discovered that there is one path of lubricating weak points on the tooth surfaces. The path is from the worm gear addendum to dedendum and is almost impossible to be eliminated via analysis and research. The path is roughly located in the middle of the worm gear tooth surface, and a lubricating weak zone exists around this path whose area roughly accounts for one-third of the whole meshing zone.

Geometry and Investigation of Klingelnberg-Type Worm Gear Drive

Computerized Design, Generation and Simulation of Meshing and Contact of Modified Involute, Klingelnberg and Flender Type Worm-Gear Drives

Computerized Design and Generation of Worm Gear Drives with Stable Bearing Contact and Low Transmission Errors

New geometry of face worm gear drives with conical and cylindrical worms: generation, simulation of meshing, and stress analysis

Computer Aided Tooth Contact Analysis in Cylindrical Worm Gears

Computer Aided Loaded Tooth Contact Analysis in Cylindrical Worm Gears

Kinematic-Geometric Lubrication Theory and Its Application to Arc-Toothed Cylindrical Worm Drive

The Design, Generation, and Simulation of Meshing of Worm-Gear Drive With Longitudinally Localized Contacts

Computerized Design, Generation and Simulation of Meshing of a Spiroid Worm-Gear Drive with a Ground Double-Crowned Worm

Influence of tooth errors and shaft misalignments on loaded tooth contact in cylindrical worm gears

Computerized Design, Generation and Simulation of Meshing of a Spiroid Worm-Gear Drive With Double-Crowned Worm

Designing and loaded tooth contact analysis of an Archimedean worm gear drive focusing for the connecting teeth of the worm wheel by loaded torques

Meshing theory of face worm gear drive with hardened cylindrical worm

Geometric interference in cylindrical worm gear drives using oversized hob to cut worm gears

New developments in the design and generation of gear drives

Computerized design and generation of modified spiroid worm-gear drive with low transmission errors and stabilized bearing contact

Face-gear drive with spur involute pinion: geometry, generation by a worm, stress analysis

Meshing theory of toroidal surface enveloping cylindrical worm drive with arc-toothed worm

Pitch Cone Design and Avoidance of Contact Envelope and Tooth Undercutting for Conical Worm Gear Drives

Modelling and simulation of a new worm gear drive having point-like contact