Abstract:It is essential to accurately assess and verify the effects of air pollution on human health and the environment in order to develop effective mitigation strategies. More accurate analysis of air pollution can be achieved by utilizing a higherdensity sensor network. In recent studies, the implementation of low-cost sensors has demonstrated their capability to quantify air pollution at a high spatial resolution, alleviating the problem of coarse spatial measurements associated with conventional monitoring stations. However, the reliability of such sensors is in question due to concerns about the quality and accuracy of their data. In response to these concerns, active research efforts have focused on leveraging machine learning (ML) techniques in the calibration process of low-cost sensors. These efforts demonstrate promising results for automatic calibration, which would significantly reduce the efforts and costs of traditional calibration methods and boost the low-cost sensors' performance. As a contribution to this promising research field, this study aims to investigate the calibration transferability between identical low-cost sensor units (SUs) for NO 2 and NO using ML-based global models. Global models would further reduce calibration efforts and costs by eliminating the need for individual calibrations, especially when utilizing networks of tens or hundreds of low-cost sensors. This study employed a dataset acquired from four SUs that were located across three distinct locations within Switzerland. We also propose utilizing O 3 measurements obtained from available nearby reference stations to address the cross-sensitivity effect. This strategy aims to enhance model accuracy as most electrochemical NO 2 and NO sensors are extremely cross-sensitive to O 3 . The results of this study show excellent calibration transferability between SUs located at the same site (Case A), with the average model performance being of R 2 = 0.90 ± 0.05 and RMSE = 3.4 ± 0.9 ppb for NO 2 , and R 2 = 0.97 ± 0.02 and RMSE = 3.1 ± 0.8 ppb for NO. There is also relatively good transferability between SUs deployed at different sites (Case B), with the average performance for NO 2 being R 2 = 0.65 ± 0.08 and RMSE = 5.5 ± 0.4 ppb, and R 2 = 0.82 ± 0.05 and RMSE = 5.8 ± 0.8 ppb for NO. Interestingly, the results illustrate a substantial improvement in the calibration models when integrating O 3 measurements, which is more pronounced when SUs are situated in regions characterized by elevated O3 concentrations. Although the findings of this study are based on a specific type of sensor and sensor model, the methodology is flexible and can be applied to other low-cost sensors with different target pollutants and sensing technologies. Furthermore, this study highlights the significance of leveraging publicly available data sources to promote the reliability of low-cost air quality sensors.

Low-Cost CO Sensor Calibration Using One Dimensional Convolutional Neural Network

Calibrating Low-Cost Sensors by a Two-Phase Learning Approach for Urban Air Quality Measurement

Low-Cost CO2 NDIR Sensors: Performance Evaluation and Calibration Using Machine Learning Techniques

Statistical Study of Sensor Data and Investigation of ML-Based Calibration Algorithms for Inexpensive Sensor Modules: Experiments From Cape Point

Calibration and Inter-Unit Consistency Assessment of an Electrochemical Sensor System Using Machine Learning

Assessment and Calibration on Low-cost PM2.5 Sensor using Machin Learning (Hybrid-LSTM Neural Network): Feasibility Study to Build Air Quality Monitoring System

Leveraging machine learning algorithms to advance low-cost air sensor calibration in stationary and mobile settings

Dynamic Measurement and Data Calibration for Aerial Mobile IoT

Transferability of ML-based Global Calibration Models for NO2 and NO Low-Cost Sensors

Few-shot calibration of low-cost air pollution (PM2.5) sensors using meta-learning

Adaptive Air Quality Sensing using Machine Learning

Deep Learning Based Calibration Time Reduction for MOS Gas Sensors with Transfer Learning

Low-Cost Outdoor Air Quality Monitoring and Sensor Calibration: A Survey and Critical Analysis

Calibration Assessment of Low-Cost Carbon Dioxide Sensors Using the Extremely Randomized Trees Algorithm

Calibration Model of a Low-Cost Air Quality Sensor Using an Adaptive Neuro-Fuzzy Inference System

Calibrating chemical multisensory devices for real world applications: An in-depth comparison of quantitative Machine Learning approaches

On Data-Driven Self-Calibration for IoT-Based Gas Concentration Monitoring Systems

High-Performance VOC Quantification for IAQ Monitoring Using Advanced Sensor Systems and Deep Learning

Blind Calibration of Air Quality Wireless Sensor Networks Using Deep Neural Networks

Data-Driven Techniques for Low-Cost Sensor Selection and Calibration for the Use Case of Air Quality Monitoring

On Memory-Based Precise Calibration of Cost-Efficient NO 2 Sensor Using Artificial Intelligence and Global Response Correction