Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

Experimental Device for the Determination of Fracture Toughness at High Pressure

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

Mode II fracture toughness determination of rock and concrete via Modified Direct Shear Test

Pure Mode I Fracture Toughness Determination in Rocks Using a Pseudo-Compact Tension (pCT) Test Approach

Fracture Toughness Measurements of Soft Sediments Based on Gas Injection Tests

Improving the Accuracy of Fracture Toughness Measurement in Burst Experiments

A new technique to measure the dynamic fracture toughness of solids

Type I Fracture Toughness Test of Rock-like Materials Based on the Particle Flow Method

Fluid pressure heterogeneity during fluid flow in rocks: new laboratory measurement device and method

Fracture of bio-cemented sands

A New Approach to Evaluate Fracture Toughness of Structural Materials

Dynamic mechanical responses and failure characteristics of fractured rocks with hydrostatic confining pressures: An experimental study

Fracture toughness (Kic) of cemented carbides

Dynamic Compressive and Tensile Characterisation of Igneous Rocks Using Split-Hopkinson Pressure Bar and Digital Image Correlation

A methodology for determining mechanical properties of nanomaterials at high pressure and temperature

Experimental study on dynamic fracture of rock-mortar specimens with different interface trajectories

Apparatus for material tests using an internal loading system in high-pressure gas at room temperature

A Novel Method for Measuring Plane Stress Dynamic Fracture Toughness

Experimental Investigation On Mode Ii Fracture Toughness K-Iic Of Concrete And Fracture Behavior

Determination of material fracture toughness by a computational/experimental approach for rapid crack propagation in PE pipe

An experimental method of measuring the confined compression strength of geomaterials