Abstract:Summary An uncommon facet of formation evaluation is the assessment of flow-related in-situ properties of rocks. Most of the models used to describe two-phase flow properties of porous rocks assume homogeneous and/or isotropic media, which is hardly the case with actual reservoir rocks, regardless of scale; carbonates and grain-laminated sandstones are but two common examples of this situation. The degree of spatial complexity of rocks and its effect on the mobility of hydrocarbons are of paramount importance for the description of multiphase fluid flow in most contemporary reservoirs. There is thus a need for experimental and numerical methods that integrate all salient details about fluid-fluid and rock-fluid interactions. Such hybrid, laboratory-simulation projects are necessary to develop realistic models of fractional flow in complex rocks, i.e., saturation-dependent capillary pressure and relative permeability. Furthermore, these two crucial properties are usually measured independently. Capillary pressure is typically assessed using static measurements and unrealistic pressure conditions, whereas relative permeability is evaluated dynamically. Consequently, the disparity between the nature of the two experimental procedures often results in a potentially significant loss of information. We document a new high-resolution visualization technique that provides experimental insight to quantify fluid saturation patterns in heterogeneous rocks which allow for the simultaneous and dynamic evaluation of two-phase flow properties. The experimental apparatus consists of an X-ray microfocus scanner and an automated syringe pump. Rather than using traditional cylindrical cores, thin rectangular rock samples are examined, their thickness being one order of magnitude smaller than the remaining two dimensions. During the experiment, the core is scanned quasicontinuously while the fluids are being injected, allowing for time-lapse visualization of the flood front. Numerical simulations are then conducted to match the experimental data and quantify effective saturation-dependent relative permeability and capillary pressure. The experimental results indicate that flow patterns and in-situ saturations are highly dependent on the nature of the heterogeneity and bedding-plane orientation during both imbibition and drainage cycles. In homogeneous rocks, fluid displacement approaches piston-like behavior. The assessment of capillary pressure and relative permeability is performed by examining the time-lapse water saturation profiles resulting from fluid displacement. In spatially complex rocks, high-resolution time-lapse images reveal preferential flow paths along high-permeability sections and a lowered sweep efficiency. Our experimental procedure emphasizes that capillary pressure and transmissibility differences play an important role in fluid-saturation distribution and sweep efficiency at late times. The method is fast and reliable to assess mixing laws for fluid-transport properties of rocks in spatially complex formations.

Fluid pressure heterogeneity during fluid flow in rocks: new laboratory measurement device and method

Differential imaging of porous plate capillary drainage in laminated sandstone rock using X-ray micro-tomography

A high pressure, high temperature gas medium apparatus to measure acoustic velocities during deformation of rock

Laboratory Simulation of Flow Through Rough-Walled Microfractures under High Hydraulic Gradient

Imaging and Measurement of Pore‐Scale Interfacial Curvature to Determine Capillary Pressure Simultaneously with Relative Permeability

Visualization and Quantification of Capillary Drainage in the Pore Space of Laminated Sandstone by A Porous Plate Method Using Differential Imaging X-Ray Microtomography

Propagation of Stress Waves Through Fully Saturated Rock Joint under Undrained Conditions and Dynamic Response Characteristics of Filling Liquid

A modified triaxial split Hopkinson pressure bar (SHPB) system for quantifying the dynamic compressive response of porous rocks subjected to coupled hydraulic-mechanical loading

Poroelastic Response of a Fractured Rock to Hydrostatic Pressure Oscillations

Laboratory-scale investigation of response characteristics of liquid-filled rock joints with different joint inclinations under dynamic loading

A method for monitoring acoustic emissions in geological media under coupled 3-D stress and fluid flow

Experimental Investigation of Two-Phase Flow Properties of Heterogeneous Rocks Based on X-Ray Microfocus Radiography

Relating Hydro‐Mechanical and Elastodynamic Properties of Dynamically Stressed Tensile‐Fractured Rock in Relation to Applied Normal Stress, Fracture Aperture, and Contact Area

Sound velocity measurement methods for porous sandstone. Measurements, finite element modelling, and diffraction correction

Experimental Measurement of Frequency-Dependent Permeability and Streaming Potential of Sandstones

Experimental Investigation of Two-Phase Flow Properties of Heterogeneous Rocks for Advanced Formation Evaluation

A method for simultaneous measurements of compressional wave and shear wave velocities in rocks and minerals at high pressure and high temperature: A modification to the combined transmission-reflection method

High pressure gas flow, storage, and displacement in fractured rock-Experimental setup development and application

Experimental Device for the Determination of Fracture Toughness at High Pressure

Investigating the Permeability Evolution of Artificial Rock During Ductile and Brittle Deformation Under Pressurized Flow

Quantifying fractured crystalline-rock properties using well tests, earth tides and barometric effects