Abstract:Abstract Flow in fractures is sensitive to their geometrical surface characteristics. The surface can undergo deformation if there is a change in stress. Natural fractures have complex geometries and rough surfaces which complicates the modelling of deformation and fluid flow. In this paper, we present a computational model that takes a digital image of a rough fracture surface and provides a stress–permeability relationship. The model is based on a first-principle contact mechanics approach at the continuum scale. Using this first principle approach, we investigate numerically the effect of fracture surface roughness and shifting of surfaces on the permeability evolution under applied stress and compare the results with laboratory experiments. A mudrock core fracture surface was digitalized using an optical microscope, and 2D cross sections through fracture surface profiles were taken for the modelling. Mechanical deformation is simulated with the contact mechanics based Virtual Element Method solver that we developed within the MATLAB Reservoir Simulation Toolbox platform. The permeability perpendicular to the fracture cross section is determined by solving the Stokes equation using the Finite Volume Method. A source of uncertainty in reproducing laboratory results is that the exact anchoring of the two opposite surfaces is difficult to determine while the stress–permeability relationship is sensitive to the exact positioning. We, therefore, investigate the sensitivity to a mismatch in two scenarios: First, we assess the stress–permeability of a fracture created using two opposing matched surfaces from the rock sample, consequently applying relative shear. Second, we assess the stress–permeability of fractures created by randomly selecting opposing surfaces from that sample. We find that a larger shift leads to a smaller drop in permeability due to applied stress, which is in line with a previous laboratory study. We also find that permeability tends to be higher in fractures with higher roughness within the investigated stress range. Finally, we provide empirical stress–permeability relationships for various relative shears and roughnesses for use in hydro-mechanical studies of fractured geological formations.

Relating Hydro‐Mechanical and Elastodynamic Properties of Dynamically Stressed Tensile‐Fractured Rock in Relation to Applied Normal Stress, Fracture Aperture, and Contact Area

Influence of Pore Pressure on Tensile Fracture Growth in Rocks: a New Explanation Based on Numerical Testing

Digital Image-Based Stress–Permeability Relationships of Rough Fractures Using Numerical Contact Mechanics and Stokes Equation

Effect of Mesoscopic Structure on Hydro-Mechanical Properties of Fractures

Measurements of elastic properties and their dependencies within a damage mechanics workflow

On the elastic anatomy of heterogeneous fractures in rock

Impact of Effective Normal Stress on Capillary Pressure in a Single Natural Fracture

Hydraulic and Mechanical Relationship of Individual Fracture in Rock under Compression and Shearing: Theoretical Study

Experimental and Numerical Modelling of Nonlinear Flow Behavior in Single Fractured Granite

Modeling of Flow Characteristics in 3D Rough Rock Fracture with Geometry Changes under Confining Stresses

Theoretical Study of the Mesoscopic Mechanism of Rock Fractures During Normal Deformation

A Framework to Obtain the Formulas of the Conductivity and Aperture of Rough Fractures under Thermohydromechanical Conditions

Variation of Fracture Parameters With Pore Pressure and Its Effects on the Anisotropic Electrical Properties of Fractured Rocks

Micro- and Macro-Behaviour of Fluid Flow Through Rock Fractures: an Experimental Study

Mesoscopic Deformation of a Hydraulic and Mechanical Aperture of a Single Fracture under Normal Stress

Experimental Investigation of Pre-Flawed Rocks under Dynamic Loading: Insights from Fracturing Characteristics and Energy Evolution

Temporal evolution of shear-induced dilatancy of rock fractures: controls from surface roughness and normal stress

Water Pressure Effects on Strength and Deformability of Fractured Rocks Under Low Confining Pressures

Dynamic mechanical responses and failure characteristics of fractured rocks with hydrostatic confining pressures: An experimental study

Characterization of Dynamic Mechanical Parameters of Rock Fracture Evolution Based on Dry Coupling Point Contact Ultrasonic Technology

Experimental study on nonlinear flow behavior in smooth and rough sandstone fractures subjected to various injection pressure and normal compressive stress