Abstract:A better understanding and anticipation of natural processes such as landsliding or seismic fault activity requires detailed theoretical and experimental analysis of rock mechanics and geomaterial dynamics. These last decades, considerable progress has been made towards understanding deformation and fracture process in laboratory experiment on granular rock materials, as the well-known shear banding experiment. One of the reasons for this progress is the continuous improvement in the instrumental techniques of observation. But the lack of real time methods does not allow the detection of indicators of the upcoming fracture process and thus to anticipate the phenomenon. Here, we have performed uniaxial compression experiments to analyse the response of a granular rock material sample to different shocks. We use a novel interferometric laser sensor based on the nonlinear self-mixing interferometry technique to observe in real time the deformations of the sample and assess its usefulness as a diagnostic tool for the analysis of geomaterial dynamics. Due to the high spatial and temporal resolution of this approach, we observe both vibrations processes in response to a dynamic loading and the onset of failure. The latter is preceded by a continuous variation of vibration period of the material. After several shocks, the material response is no longer reversible and we detect a progressive accumulation of irreversible deformation leading to the fracture process. We demonstrate that material failure is anticipated by the critical slowing down of the surface vibrational motion, which may therefore be envisioned as an early warning signal or predictor to the macroscopic failure of the sample. The nonlinear self-mixing interferometry technique is readily extensible to fault propagation measurements. As such, it opens a new window of observation for the study of geomaterial deformation and failure.

On the elastic anatomy of heterogeneous fractures in rock

On the elastic-wave imaging and characterization of fractures with specific stiffness

Relating Hydro‐Mechanical and Elastodynamic Properties of Dynamically Stressed Tensile‐Fractured Rock in Relation to Applied Normal Stress, Fracture Aperture, and Contact Area

Generalized linear sampling method for elastic-wave sensing of heterogeneous fractures

Mechanical Compliance of Individual Fractures in a Heterogeneous Rock Mass from Production‐type Full‐waveform Sonic Data

Measurements of elastic properties and their dependencies within a damage mechanics workflow

Quantifying the Progressive Fracture Damage of Granite Rocks by Stress–Strain, Acoustic Emission, and Active Ultrasonic Methods

Fracture characterization of fractured rock bodies based on acoustic and optical characteristics

Rock damage and fracture characteristics considering the interaction between holes and joints

Laboratory Shear Behavior of Tensile- and Shear-Induced Fractures in Sandstone: Insights from Acoustic Emission

Fracture Evolution and Localization Effect of Damage in Rock Based on Wave Velocity Imaging Technology

Frequency-dependent elastic properties of fracture-induced VTI rocks in a fluid-saturated porous and microcracked background

Real-time imaging of interfacial damage in layered composites

Laboratory visualization of damage asymmetry formation of rock fracture via acoustic emission and digital imaging correlation

Real time observation of granular rock analogue material deformation and failure using nonlinear laser interferometry

Effect of fracture orientation on ultrasonic wave signatures

Integrated acoustic-optic-mechanics (AOM) multi-physics field characterization methods for a crack: tension vs. shear

Effective elastic properties of rocks with transversely isotropic background permeated by a set of vertical fracture cluster

Detection of Cracking Levels in Brittle Rocks by Parametric Analysis of the Acoustic Emission Signals

Modeling 1-D elastic P-waves in a fractured rock with hyperbolic jump conditions

Simulation of Shear and Tensile Fractures Using Ductile Phase Field Modelling with the Calibration of P Wave Velocity Measurement and Moment Tensor Inversion