Abstract:Abstract Conventional manufacturing techniques to fabricate microfluidic chips, such as soft lithography and hot embossing process, have limitations that include difficulty in preparing multiple-layered structures, cost- and labor-consuming fabrication process, and low productivity. Digital light processing (DLP) technology has recently emerged as a cost-efficient microfabrication approach for the 3D printing of microfluidic chips; however, the fabrication resolution for microchannels is still limited to sub-100 microns at best. Here, we developed an innovative DLP printing strategy for high resolution and scalable microchannel fabrication by dosing- and zoning-controlled vat photopolymerization (DZC-VPP). Specifically, we proposed a modified mathematical model to precisely predict the accumulated UV irradiance for resin photopolymerization, thereby providing guidance for the fabrication of microchannels with enhanced resolution. By fine-tuning the printing parameters, including optical irradiance, exposure time, projection region, and step distance, we can precisely tailor the penetration irradiance stemming from the photopolymerization of the neighboring resin layers, thereby preventing channel blockage due to UV overexposure or compromised bonding stability owing to insufficient resin curing. Remarkably, this strategy can allow the preparation of microchannels with cross-sectional dimensions of 20 μm × 20 μm using a commercial printer with a pixel size of 10 μm × 10 μm; this is significantly higher resolution than previous reports. In addition, this method can enable the scalable and biocompatible fabrication of microfluidic drop-maker units that can be used for cell encapsulation. In general, the current DZC-VPP method can enable major advances in precise and scalable microchannel fabrication and represents a significant step forward for widespread applications of microfluidics-based techniques in biomedical fields.

Fabrication of a 1×4 optical splitter by 3D printing and microfluidic abrasive micromachining

3D nanoprinting for fiber-integrated achromatic diffractive lens

Fabrication of optical components with nm- to mm-scale critical features using three-dimensional direct laser writing

Progress in three-dimensional integrated optical beam splitters

Fabrication of microchannels by space-selective control of phase separation in glass.

Ultrafast three-dimensional printing of optically smooth microlens arrays by oscillation assisted digital light processing.

Manufacture of Three-Dimensional Optofluidic Spot-Size Converters in Fused Silica Using Hybrid Laser Microfabrication

Three-dimensional Micro/nano-Fabrication by Integration of Additive and Subtractive Femtosecond-Laser Direct Writing Processes

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Fabrication Of Microfluidic Devices In Silica Glass By Water-Assisted Ablation With Femtosecond Laser Pulses

Additive and Subtractive 3D-Microfabrication of Micro/nanostructures

Spinning Desicurer: A cost-effective and generalizable post-processing method for enhanced optical quality in 3D-printed microfluidics

3D Printing Mesoscale Optical Components with a Low-Cost Resin Printer Integrated with a Fiber-Optic Taper

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization

Laser Nanofabrication: Applications in Micro-Optics, Micro-Electronics, Micromachines, and Microfluidics

Laser-Induced Bubble Dynamics Optimization for High-Aspect-Ratio 3D Micro-Fluidic Channels Fabrication

Optical Fabrication of Three-Dimensional Polymeric Microstructures

High-throughput 3D printing of customized imaging lens

Design and Fabrication of Polymer-Based Multimode Interference Optical Splitters

3D Multi-Microchannel Helical Mixer Fabricated by Femtosecond Laser inside Fused Silica

Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips