Abstract:The 3D photonic integrated structure can increase the integration density of the device on a limited chip area, so that the chip has a higher optical interconnection capability. A polarization beam splitter (PBS) is one of the key components for manipulating different polarization states in the areas of optical interconnection and communication. In this paper, a novel interlayer PBS based on an asymmetrical directional coupler (DC) was proposed, which consists of a silicon rib waveguide (WG) and a silicon nitride (Si3N4) strip WG with a gap of 850 nm. By carefully adjusting the geometric parameters of the DC, the phase matching condition between these two WGs can be satisfied for the TM polarization, while the coupling efficiency of the TE polarization is frustrated due to the large phase mismatch. By adding a filter to the thru port the performance of the proposed PBS is improved. The device with a 220 nm Silicon-On-Insulator (SOI) WG and a 700 nm x 400 nm Si3N4 WG operates in a broadband width of 100 nm, with an extinction ratio (ER) >20 dB. The insertion losses (ILs) are <0.22 dB for both TE and TM polarizations at a wavelength of 1550 mn At the same time, our design parameters conform to the Multi Project Wafer (MPW) process conditions, and the device is highly implementable. The device is potential to use for the on-chip 3D optical interconnect in the future.

Progress in three-dimensional integrated optical beam splitters

Broadband and High Uniformity Y Junction Optical Beam Splitter with Multimode Tapered Branch

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Design and Optimization of Broadband Polarization Beam Splitter Made from A Wave-Structured Multilayer Film

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Glass-based integrated optical splitters: Engineering oriented research

Three-dimensional Power Splitter Based on Self-Imaging Effect in Multimode Layer-by-layer Photonic Crystal Waveguides

Polarization-independent two-dimensional dielectric grating for 3 × 3 beam splitter

Photonic Crystal-Based Optical Beam Splitter in Silicon

Design of Feasible Si-Si3N4 Interlayer Polarization Beam Splitter Toward 3D Optical Interconnect

Highly Efficient Photonic-Crystal Splitters Based on One-Way Waveguiding

Bidirectional trifunctional splitter with two sided microstructure

A Novel Optical Beam Splitter Based on Photonic Crystal with Hybrid Lattices

Three Dimensional Beam Splitter in Silica Substrate Based on Orthogonal Cascaded Y-Branch Couplers

Multi-channel beam splitters based on gradient metasurfaces

The fabrication of a 25x25 multiple beam splitter

Methods and applications of on-chip beam splitting: A review

Flexible optical waveguide beam splitters based on directional coupling

Exploring the fundamental limits of integrated beam splitters with arbitrary phase via topology optimization

A Novel Application of Two-Dimensional Photonic Crystals: Polarization Beam Splitter

On-chip Multiple Beam Splitting Assisted by Bound States in the Continuum.