Abstract:A short polarization beam splitter (PBS) is presented based on an asymmetrical evanescent coupling system, which consists of a narrow input waveguide, a narrow output waveguide, and a wide middle optical waveguide between them. The width of the waveguides is designed so that the phase-matching condition is satisfied for the TM fundamental (TM0) mode in the narrow input/output waveguide and the first higher order TM (TM1) mode in the wide middle waveguide. Meanwhile, there is a significant phase mismatch for the case with TE polarization. Therefore, for the launched TE polarized light, almost no coupling happens when it goes through the coupling region and finally the TE polarized light is output from the through port. For the launched TM0 mode in the narrow input waveguide, it is completely coupled to the TM1 mode in the wide middle waveguide by choosing the optimal length of the coupling region. Furthermore, the TM1 mode excited in the wide middle waveguide is then coupled to the TM0 mode in the narrow output waveguide through the evanescent coupling between them. A short (similar to 25 mu m long) PBS is designed based on silicon-on-insulator nanowires, while the gap width is chosen as large as 300 nm to make the fabrication easy. Numerical simulations show that the present PBS has a good fabrication tolerance for the variation of the waveguide width ( more than +/- 20nm) and a broadband (similar to 50 nm) for an extinction ratio of >15 dB.

Design of Feasible Si-Si3N4 Interlayer Polarization Beam Splitter Toward 3D Optical Interconnect

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Compact Polarization Beam Splitter for Silicon Photonic Integrated Circuits with a 340-Nm-thick Silicon Core Layer.

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Silicon nitride directional coupler-based polarization beam splitter utilizing shallow ridge waveguides for improved fabrication tolerance

Silicon Polarization Beam Splitter Based on an Asymmetrical Evanescent Coupling System with Three Optical Waveguides

Polarization-insensitive EDG demultiplexer combined with a polarization beam splitter.

Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Compact and Low-Loss 1 × 3 Polarization-Insensitive Optical Power Splitter Using Cascaded Tapered Silicon Waveguides

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

Polarization Beam Splitter on Lithium Niobate on Insulator Using a Silicon Nitride Assisted Waveguide

An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Improved Inverse Design of Polarization Splitter with Advanced Bayesian Optimization

High-Performance Silicon Polarization Beam Splitter Assisted by the Sub-Wavelength Structures

Polarization beam splitter based on a silicon nitride-silica-silicon horizontal slot waveguide

Inverse Design of Highly-Efficient and Broadband Polarization Beam Splitter on SOI Platform

Compact and Broadband Silicon-Based Polarization Beam Splitter Using Asymmetric Directional Couplers Embedded with Subwavelength Gratings and Slots.

Compact Polarization Beam Splitter Based on a Three-Waveguide Asymmetric Coupler with a 340-Nm-thick Silicon Core Layer

Ultra‐Broadband and Ultra‐Compact On‐Chip Silicon Polarization Beam Splitter by Using Hetero‐Anisotropic Metamaterials

Silicon-based subwavelength grating polarization beam splitter with asymmetric directional coupler

Design of Compact TE/TM Polarization Beam Splitter Based on Silicon-on-Insulator Ridge Nanowire Directional Coupler