Abstract:Three-dimensional molecular dynamics (MD) simulations have been performed to investigate behaviors of nanoindentation and nano-scratch. The first case concerns the effects of material defect on the nanoindentation of nickel thin film. The defect is modeled by a spherical void embedded in the substrate and located under the surface of indentation. The simulation results reveal that compared to the case without defect, the presence of the void softens the material and allows for larger indentation depth at a given load. MD simulations are then performed for nano-scratch of single crystal copper, with emphasis on the effect of indenter shape (sharp and blunt) on the substrate deformation. The results show that the blunt indenter causes larger deformation region and much more dislocations at both the indentation and scratch stages. It is also found that during the scratching stage the blunt indenter results in larger chip volume in front of the indenter and gives rise to more friction than the sharp indenter. The scope of the simulations has been extended by introducing a multiscale model which couples MD simulations with Finite Element Method (FEM), and multiscale simulations are performed for two-dimensional nanoindentation of copper. The model has been validated by well-consistent load-depth curves obtained from both multiscale and full MD simulations, and by good continuity of deformation observed in the handshake region. The simulations also reveal that indenter radius and indentation velocity significantly affect the nanoindentation behavior. By use of multiscale method, the system size to be explored can be greatly expanded without increasing much computational cost.

Surface and interface mechanical properties of inorganic nanolayers

Study of Effect of Indenter Shape in Nanometric Scratching Process Using Molecular Dynamics

Delamination of MoS2/SiO2 Interfaces under Nanoindentation.

Nanoindentation Simulation of Ni-Base Single-Crystal Superalloy with the Consideration of Interface Effect

Influnence of Indenter on the Nanoindentation of Ni Based Single Crystal Alloy

Mechanical and tribological properties of Ni/Al multilayers—A molecular dynamics study

Simultaneous effect of grain size and indenter dimension on the dislocation nucleation and growth in nanoindentation and nanoscratch processes

Effect of Crystallographic Orientation on Nano-indentation Behavior of Nickel Based Single Crystal Super Alloys

Nanoscale Friction Behavior of the Ni-Film/Substrate System under Scratching Using MD Simulation

Molecular Dynamics And Multiscale Simulations Of Nanoindentation And Nanoscratch

Deformation Evolution of Cu/Ta Nanoscale Multilayer During Nanoindentation by a Molecular Dynamics Study

Modeling Effect of Surface Roughness on Nanoindentation Tests

Study of Nanoscale Wear of SiC/Al Nanocomposites Using Molecular Dynamics Simulations

Atomic Scale Simulation On The Anti-Pressure And Friction Reduction Mechanisms Of Mos2 Monolayer

Nanoindentation and nanoscratch behaviors of Ag/Ni multilayers

Contact and Friction at Nanoscale

The role of rough surface in the size-dependent behavior upon nano-indentation

Indenter Geometrical Effects on Sub-Micro/Nano Indentation and Scratch Behaviors of Polymeric Surfaces

Nano-indentation and nano-scratching of pure nickel and NiTi shape memory alloy thin films: an atomic-scale simulation

Effects of indenter depth and velocity in nano-Cu film scratch process using multiscale method

Molecular Dynamics Simulation of Nanoindentation on Cu/Ni Nanotwinned Multilayer Films Using a Spherical Indenter.