Abstract:As the titanium industry rapidly develops, low-grade ilmenite resources are drawing global attention. The direct use of low-grade ilmenite can result in low production efficiency and heavy pollution. In addition, the production of high-titanium slag via electric furnace melting consumes significant energy and possesses low production efficiency. Therefore, a novel process with low energy consumption is necessary for producing ultra-grade slag (UGS) for chlorination. For low-grade ilmenite, semi-molten reduction and magnetic separation were suggested in this study. The effects of carbon content, reduction time, and Na2CO3 addition on the reduction and separation behavior were studied. The results showed that the addition of Na2CO3 favored the formation of a semi-molten state, which was more conducive for the diffusion, aggregation, and growth of the metal phase. In this regard, excess carbon was not helpful, and it weakened the growth of the metal phase. Wet grinding and magnetic separation were used for beneficiation of the reduced sample for efficiently separating the slag iron and preventing the formation of agglomerates between slag and metal. For the sample with a carbon dosage of 13 pct, Na2CO3 dosage of 8 pct, reduction temperature of 1673 K (1400 °C), and 90 minutes holding time, high-titanium slag with a TiO2 grade of 81.63 pct and iron content of 4.53 pct was produced, with the TiO2 recovery rate of 93.43 pct and the yields of 55.37 pct. High-titanium slag can be used as a high-quality raw material to produce UGS for chlorination by leaching.

Flow and Reaction Characteristic in a Stirred Reactor for Corrosion Process of Reduced Ilmenite

Aeration Leaching Process for Producing Synthetic Rutile in a Novel Gas–Liquid–Solid Reactor

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

CFD Simulation of Solid Suspension for a Liquid–Solid Industrial Stirred Reactor

Gas Cross-Flow Mixing in TiO2 Oxidation Reactor of Chloride Process

Ilmenite Ore As an Oxygen Carrier for Pressurized Chemical Looping Reforming: Characterization and Process Simulation

Accelerated Syngas Generation from Chemical Looping CH4 Reforming by Using Reduced Ilmenite Ore As Catalyst

High-Titanium Slag Preparation Process by Carbothermic Reduction of Ilmenite and Wet-Magnetic Separation

Preparation of Iron Oxide Red with High Titanium Slag Recovery Dust

Kinetic Study of Iron Ore Fines Reduction in Circulating Fluidized Bed

Effect of NH4Cl on the rusting leaching behavior of metallic phase of iron in reduced ilmenite during TiO2 purification: An electrochemical and density-functional theory study

Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Isothermal kinetics of carbothermic reduction of ilmenite concentrate with the addition of sodium carbonate

Chemical Looping Reforming for Syngas Production with Co-Conversion of CH4 and CO2 by Using Ilmenite Ore As Both Oxygen Carrier and Catalyst

Numerical Understanding on Refractory Flow-Induced Erosion and Reaction-Induced Corrosion Patterns in Ladle Refining Process

Reduction kinetics of foreign-ion-promoted ilmenite using carbon monoxide (CO) for chemical looping combustion

Isothermal reduction and nitridation kinetics of ilmenite concentrate in ammonia gas

Effect of turbulent flow on the oxide properties of carbon steel in alkaline water

Structural Optimization of Reactor for the Enhancement of CO2 Electrochemical Reduction Based on Gas–Liquid Mixing Flow Model

Mechanism of Phase Segregation in Ilmenite Oxygen Carriers for Chemical-Looping Combustion