Abstract:Rising atmospheric carbon dioxide (CO2) concentrations has led to an increased focus on electrochemical CO2 reduction using low-cost renewable electricity to produce low-carbon-intensity fuels and chemical feedstocks. The electrosynthesis of multicarbon (C2+) hydrocarbons and oxygenates, such as ethylene and ethanol, from CO2 feedstocks is appealing due to the large global market demand of these high-value products. Industrial-scale implementation of this technology requires operation at reaction rates above 100 mA/cm2 to minimize electrolyzer capital costs. Gas diffusion electrodes (GDEs) feed CO2 directly to the electrocatalyst surface, alleviating mass transport limitations faced in traditional aqueous environments and enabling operation at industrially relevant reaction rates. However, when implemented in conventional liquid flow cells with alkaline or neutral electrolytes, major challenges emerge in maintaining electrolyte stability with detrimental carbonate and bicarbonate formation, consequently having adverse effects on energy efficiency. Here we introduce therefore a membrane electrode assembly (MEA) based CO2 electrolyzer for C2+ production. We investigate the extent to which it can overcome the electrolyte stability limitations by eliminating alkaline electrolyte degradation and neutral electrolyte salt precipitation typically observed in the conventional approach. The MEA design maintains its performance while operating at elevated temperatures and low partial pressures of CO2, important considerations for industrial reactors. We further design a copper catalyst that takes advantage of the high CO2 concentrations afforded by the MEA. This catalyst design strategy achieves more than 50% Faradaic efficiency towards ethylene and more than 80% Faradaic efficiency towards C2+ products while operating at more than 300 mA/cm2. We demonstrate the stability of the system design through the continuous generation of ethylene while operating at industrially-relevant currents for more than 100 hours. The outcome is an engineered system that provides the longest stable ethylene production amongst all CO2 electrolyzers at reaction rates greater than 100 mA/cm2. To reduce costs associated with gas product separation from dilute streams, maximizing CO2 utilization is important. We investigate alternative flow field designs for the MEA reactor to achieve uniform reactant distribution, leading to improved current densities and reduced hydrogen evolution by at least 25% each. Finally, we demonstrate the process and system scalability through C2+ production in a large-scale MEA electrolyzer as part of the NRG COSIA Carbon XPRIZE.

Directly‐Deposited Ultrathin Solid Polymer Electrolyte for Enhanced CO2 Electrolysis

Electrochemical Reduction of Gaseous CO2 with a Catechol and Polyethyleneimine Co-Deposited Polypropylene Membrane

Polymer‐Supported Liquid Layer Electrolyzer Enabled Electrochemical CO2 Reduction to CO with High Energy Efficiency

Carbon Dioxide Electroreduction to Multi-Carbon Products Using a Large-Scale Membrane Electrode Assembly

Anionic Ionomer: Released Surface-Immobilized Cations and an Established Hydrophobic Microenvironment for Efficient and Durable CO2-to-Ethylene Electrosynthesis at High Current over One Month

Trilayer Polymer Electrolytes Enable Carbon‐efficient CO2 to Multicarbon Product Conversion in Alkaline Electrolyzers

Direct Membrane Deposition for CO 2 Electrolysis

Cationic Covalent Organic Framework with Ultralow HOMO Energy Used as Scaffolds for 5.2 V Solid Polycarbonate Electrolytes

Efficient Electroreduction of CO2 in an Ultra-Slim Pressurized Electrolyzer

Carbon‐Efficient CO2 Electrolysis to Ethylene with Nanoporous Hydrophobic Copper

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

A Solid-State Electrolyte Facilitates Acidic CO2 Electrolysis without Alkali Metal Cations by Regulating Proton Transport

Anchoring Cs+ Ions on Carbon Vacancies for Selective CO2 Electroreduction to CO at High Current Densities in Membrane Electrode Assembly Electrolyzers

Polymer-coated silica dual functional fillers to improve the performance of poly(ethylene oxide)-based solid electrolytes

Backbone Engineering of Polymeric Catalysts for High‐Performance CO2 Reduction in Bipolar Membrane Zero‐Gap Electrolyzer

Enhanced electrochemical stability and ion transfer rate: A polymer/ceramic composite electrolyte for high-performance all-solid-state lithium-sulfur batteries

Ionomer and Membrane Designs for Low‐Temperature CO2 and CO Electrolysis

High-Rate and Efficient Ethylene Electrosynthesis Using a Catalyst/Promoter/Transport Layer

Intrinsically Conductive and Cu-Functionalized Polymer-Composite Membranes as Gas Diffusion Electrodes for CO2 Electroreduction

Immobilized Tetraalkylammonium Cations Enable Metal‐free CO2 Electroreduction in Acid and Pure Water

Interface design for enhancing carbon dioxide electrolysis in a fluidized electrode of photoelectrochemical cell