Effect of solvents in the formation of PES-based asymmetric flat sheet membranes in phase inversion method: phase separation and rheological studies

Sinu Poolachira,Sivasubramanian Velmurugan

DOI: https://doi.org/10.1007/s13726-022-01131-y

2023-01-07

Iranian Polymer Journal (English Edition)

Abstract:The morphology and performance characteristics of an asymmetric membrane can be tailored by precisely controlling the dope solution's thermodynamic features and diffusive behavior. In this work, integrally skinned asymmetric polyethersulfone (PES) membranes were made by phase inversion method. A study on the phase inversion behavior of PES membrane in different solvents and their morphological evolution have been conducted. The critical polymer concentration (C*) of the dope solutions in different solvents was initially measured from the interdependence of shear viscosity against polymer concentration. Ternary phase diagrams, solution viscosity and the transmittance decay of the dope system are studied and used to relate the thermodynamic and kinetic features with the membrane morphology. The phase diagrams of various systems are delineated based on the obtained cloud point data. The dope systems' dynamic mechanical analysis is also studied and hence helps to predict the trade-off between the casting solution's thermodynamic and rheological properties. Carreau- Yasuda (CY) regression model was applied to the data points inferred from experimental analysis to validate the results attained from the viscosity profile. Finally, all the prepared membranes are subjected to cross-flow filtration with an active membrane area of 42 cm 2 , and the obtained water flux values are compared. Moreover, the PES/DMF system with a top surface pore size of 34.17 nm, a porosity of 46.1 ± 1.2%, and a pure water flux value of 35.2 L/m 2 h are selected for future studies.