Abstract:The pressurized slurry is the essential part of the slurry pressure balanced shield (SPBS) for stabilizing the working face and transporting the excavated soil. If clogging occurs in case of adverse ground conditions or equipment failure, a series of consequences will happen, such as sudden changes in slurry pressure, massive ground loss, and deformation or even collapse at tunnel workface. The present study reviewed and summarized the clogging mechanism of the slurry shield under different ground conditions. Then, based on the law of conservation of mass and Bernoulli's Equation, an analytical approach was developed to investigate the effects of clogging on the slurry velocity and pressure along with the deformation of tunnel workface. Furthermore, a case study and field measurements were conducted to validate the analytical method. The significant findings drawn from the study can be summarized as follows: (1) The clogging of a slurry shield imposes severe effects on the slurry pressure balancing mechanism of shield tunneling. It can occur in both cohesive and non-cohesive ground with different formation mechanisms. (2) During the initial clogging, the slurry pressure above the spring line increases, and that below the spring line decreases. With the clogging deteriorating, the slurry velocity drops considerably at the top of the deposit area and escalates near the discharging port. The presence and increase of deposit lead to a sharp rise of slurry pressure in the slurry chamber, especially in the clogging region. (3) The reverse circulation of the slurry system (RCSS) is useful to clear the clogging. Still, the slurry deposits at the bottom will obstruct the slurry reverse flow, resulting in inward deformation of the tunnel face and a drastic increase in overcutting volume. (4) The ultimate volume deviation ratio of the slurry was proposed as a useful index to alarm the potential risk of collapse induced by the RCSS. (5) The timely adoption of RCSS is strongly suggested when any abnormal changes in the slurry pressure or the ultimate volume deviation ratio are observed for the first time.

Experimental analysis of sand-bearing muck blockages inside single circle earth pressure balance shield chambers

Analysis of reverse torque of EPB shield tunneling in soft ground

CASE STUDY OF RELIEVING A SLURRY SHIELD?S CUTTER HEAD FROM BEING TRAPPED IN SILTY SAND LAYERS

ANALYSIS OF GROUND SURFACE DISPLACEMENT AND HORIZONTAL MOVEMENT OF DEEP SOILS INDUCED BY SHIELD ADVANCING

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Earth Pressure Balance Control for EPB Shield

Supporting Pressure for Earth Pressure Balance Tunnel Face Stability when Tunneling is Implemented in Saturated Sandy Soil

Determination of the Cutterhead Torque for EPB Shield Tunneling Machine

Earth Layer Recognition During the Shield Machine Digging and Control Strategy of the Cutter Head Speed

A method for real-time identification of muck flow state inside EPB shield chambers in fine-grained soils

Ground Surface Deformation Control Based on Chamber Pressure Direct Feedback

Investigation of the Dynamic Characteristics of Muck during EPB Shield Tunnelling in a Full Chamber Model Using a CFD Method

Research of EPB Shield Tunneling Parameter Relations and Their Influence on Stratum Displacement

Characterization and Computational Fluid Simulation of Conditioned Muck During EPB Shield Tunneling in Gravelly Sand Stratum

STUDY ON SOIL-COMPACTING EFFECTS INDUCED BY EARTH PRESSURE BALANCE SHIELD CONSTRUCTION

Soil disturbance induced by EPB shield tunnelling in multilayered ground with soft sand lying on hard rock: A model test and DEM study

Experimental Study on Interaction between Slurry and Soil on Excavation Face of Shield in Sand Stratum

The analysis for characteristic of particles movement and pressure balance stability in the shield soil chamber during the EPBS excavation in weathered diorite stratum

Face stability conditions in granular soils during the advancing and stopping of earth-pressure-balanced-shield machine

Numerical Study on the Dynamic Response Characteristics of Liquefiable Silty Sand-Rock Composite Strata – Tunnel System under the Influence of the Vibration of a Shield Cutter-Head

Analytical study and field investigation on the effects of clogging in slurry shield tunneling